Tel: +86-371-86151827

marine steel plate chemical composition

Steel grade:marine steel plate chemical composition

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

marine steel plate chemical composition Introduction

NK grade A36 steel chemical composition

steel grade ship chemical composition steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. steel grade ship chemical composition can be used F, b, z were expressed as boiling steel, semi-static steel, killed steel.

CCS EH32 shipbuilding steel plate, CCS Grade EH32 marine ...

CCS EH32 shipbuilding steel plate is nromally used to build ships and vessels which sailed in ocean waters and the tough situiation. CCS Grade EH32 marine steel shall be done low temperature impacting test under minus 40 centigree when rolling.Minimum yield strength for shipbuilding steel plate CCS Grade EH32 is at 315 Mpa.

RINA DH32 steel chemical composition

RINA DH32 steel chemical composition, hull structure steel ...RINA DH32 steel chemical composition,BBN steel supply AH32 marine plate,LR AH36 hull shipbuilding plate,marine grade EH36 ship building steel plate,BV A boat plate, FH32 marine grade steel etc …[PDF]

Comparing Steel Plate Grades - Continental Steel & Tube …

Comparing Steel Plate Grades. ... especially in the construction of ships, barges, and marine equipment. It has a tensile strength of 58 to 71 ksi, and a ... chemical composition of the steel, indicated by a letter/number grade. The basis for these grades comes from several

ABS Grade A Steel plate,ABS Grade A ship plate,ABS Grade A ...

ABS Grade A shipbuilding steel plate,ABS A marine steel plate, grade A steel plate for ship building,ABS A ship steel sheet supplier. ABS Grade A shipbuilding Steel Description: ABS Steels are types of structural steel which are standardized by the American Bureau of Shipping for use in …

Chemical Composition Requirements for Offshore Steel

Chemical Composition Requirements for Offshore OCTG steel. The factors affecting the performance of steel are: chemical composition, smelting and casting, rolling and heat treatment processes, etc., mainly chemical components; sulfur and phosphorus content directly affect the performance of the thickness direction of the steel plate.

BV A32 marine steel sheet chemical composition-BBN STEEL ...

DNV Grade A32 Shipbuilding Steel PlateDNV Grade A32 Shipbuilding steel plate is mainly used to Shipbuilding Project and Ocean Offshore Structural Project. Steel Name: DNV Grade A32 Shipbuilding steel plate,DNV Grade A32 Ship Steel plate ,DNV Grade A32 Marine Steel plate , DNV Grade A32 Steel Plate . ... Chemical Composition…

ABS Grade A shipbuilding steel plate steel,ABS Grade A ...

ABS Grade A, ABS/A steel, ABS/A steel plate, ABS/A steel sheet, ABS/A shipbuilding steel price, ABS/A steel supplier and manufacturer. ABS Grade A shipbuilding Steel Description: ABS grade A steel is a kind of hot rolled general tensile strength steel. ABS steels come 4 grades in ordinary-strength steel for shipbuilding and grade A is the lowest one of them.

Steel Standards - ASTM International

ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, as well as other accessories related to them.

BV EH32 Marine steel sheet Material, BV Grade EH32 ...

BV EH32 shipbuilding steel,BV Grade EH32 Marine steel,BV EH32 steel sheet,BV Gr.EH32 ship plate,BV Grade EH32 shipbuilding steel plate which are rolled under Normalised or Thermal Mechanical Control Processing.For most steel mills,BV agency just approved them to roll BV Grade EH32 with the maximum thickness till 100 millimeters.

ABS Grade A Steel plate,ABS Grade A ship plate,ABS Grade A ...

ABS Grade A shipbuilding steel plate,ABS A marine steel plate, grade A steel plate for ship building,ABS A ship steel sheet supplier. ABS Grade A shipbuilding Steel Description: ABS Steels are types of structural steel which are standardized by the American Bureau of Shipping for use in …

BV A32 marine steel sheet chemical composition-BBN STEEL ...

DNV Grade A32 Shipbuilding Steel PlateDNV Grade A32 Shipbuilding steel plate is mainly used to Shipbuilding Project and Ocean Offshore Structural Project. Steel Name: DNV Grade A32 Shipbuilding steel plate,DNV Grade A32 Ship Steel plate ,DNV Grade A32 Marine Steel plate , DNV Grade A32 Steel Plate . ... Chemical Composition…

DNV A36,DNV A36 shipbuilding plate,DNV A36 marine plate ...

DNV A36 (NVA36) NV Shipbuilding Steel Plate. The delivery States of DNV A36 (NVA36) steel plate is Pretreatment, CR or Normalizing. CR (Controlled Rolling), N (Normalizing), TM, QT (Quenching and Tempering) and other delivery states are available as customers’ requirement.

ABS Grade A shipbuilding steel plate steel,ABS Grade A ...

ABS Grade A, ABS/A steel, ABS/A steel plate, ABS/A steel sheet, ABS/A shipbuilding steel price, ABS/A steel supplier and manufacturer. ABS Grade A shipbuilding Steel Description: ABS grade A steel is a kind of hot rolled general tensile strength steel. ABS steels come 4 grades in ordinary-strength steel for shipbuilding and grade A is the lowest one of them.

DNV Grade A32 Shipbuilding Steel Plate

DNV Grade A32 Shipbuilding steel plate is mainly used to Shipbuilding Project and Ocean Offshore Structural Project.

ABS DH40 steel plate steel,ABS DH40 steel plate marine ...

Grade ABS DH40, ABS DH40 steel, ABS DH40 steel plate, ABS DH40 steel sheet, ABS DH40 shipbuilding steel price,ABS DH40 steel supplier and manufacturer. ABS DH40 shipbuilding Steel Description: ABS DH40 steel is a kind of hot rolled high tensile strength steel. Higher-strength ABS shipbuilding steel comes in 12 grades of 3 strengths, DH40 is one of the grades.

A516 Steel Plate - Grade 55, 60, 65, 70 | Leeco Steel, LLC

leecosteel› …› Pressure Vessel (PVQ) Steel PlateA516 steel plate, also known as PVQ516 steel plate, is carbon steel with specifications for pressure vessel plates and moderate or lower temperature service. A516 steel plate is intended primarily for service in welded pressure vessels where improved notch toughness is important.

Marine & OffShore Steel Plate Products | BBN Steel

We offer the following Marine & Offshore Steel Plate Products: ASTM A131 A&B / ABS A&B. ASTM A131 / ABS AH36 / ABS DH36 / ABS EH36. API 2H Grade 50. ASTM A633. BBN Steel Products. Structural, Carbon & HSLA Steel Plate .

A572 Steel Plate - leecosteel

leecosteel› Steel Plate ProductsLeeco Steel distributes A572 steel plate is used in a variety of structural applications including bridges, buildings, construction equipment, and more. We distribute A572 steel plate in the following grades: Grade 42, Grade 50, Grade, 55, Grade 60, and Grade 65. We offer various thicknesses, lengths, and widths to meet your specifications.[PDF]

ASTM A36 Mild/Low Carbon Steel

ASTM A36 is the most commonly used mild and hot-rolled steel. It has excellent welding properties and is suitable for grinding, punching, tapping, drilling and machining processes. Yield strength of ASTM A36 is less than that of cold roll C1018, thus enabling ASTM A36 to bend more readily than C1018.

Q345 Steel Specification and Equivalent Standard

Q345 steel specification: Q345 steel belongs to 16Mn steel grade, usually it is produced in hot rolled state, hot rolled steel plate, hot rolled steel coil/sheet, it has comprehensive mechanical and welding property, as it shows good performance in structural purposes, it is widely used as welding structural part in manufacturing of ship, railway and vehicles, bridges, boiler, pressure vessel ...

API 2H Grade 50 Marine & OffShore Steel Plate | BBN Steel

Marine & OffShore Steel Plate. API 2H Grade 50. An intermediate-strength, normalized, structural steel plate utilized in the welded construction of offshore structures. This grade is regulated by the American Petroleum Institute (API). Because of its specific restrictions, API has also been adapted in many other applications such as Base rings ...[PDF]

Chemical Composition of Structural Steels

Following is a list of some important chemical elements used in structural steels: Carbon (C) Next to iron, carbon is by far the most important chemical element in steel. Increasing the carbon content produces a material with higher strength and lower ductility.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.