Tel: +86-371-86151827

cold rolled astm standard carbon steel a1011 plate

Steel grade:cold rolled astm standard carbon steel a1011 plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

cold rolled astm standard carbon steel a1011 plate Introduction

ASTM A1008 / A1008M - 18 Standard Specification for Steel ...

ASTM A1008 / A1008M - 18 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

ASTM A1011 / A1011M - 18a Standard Specification for Steel ...

ASTM Standards. A568/A568M Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for A635/A635M Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy...

A569, ASTM A1011, ASTM A36 Carbon Steel Sheet Stock ...

A569, ASTM A1011, ASTM A36 Carbon steel blanks, flats, bars, plates and sheet stock from Grainger come in a variety of widths, lengths and thicknesses for your industrial applications.

Carbon Sheet - Ryerson

Carbon Sheet Ryerson’s carbon sheet comes in a variety of grades and thicknesses. We offer carbon sheet coated, cold rolled, hot rolled, painted and as expanded metal. Common applications range from construction framing and ductwork to machinery framing.

0.075" (14 GA) ASTM A1011 Hot Rolled STEEL SHEET - Online ...

Hot Rolled Steel Sheet A1011 (0.075" - 14 GA) is made of low carbon steel that is commonly found in most industries as it is a high strength, highly formable steel, commonly used to create drums, containers, and in general fabrication. Unlike cold rolled steel, Hot Rolled Steel Sheet A1011 has a rougher surface and with galvanization,...[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

Steel Plate and Sheet ASTM A1011/1018 HR CS Type B Hot rolled commercial quality steel is suitable for many applications where normal surface imperfections are not objectionable. Heat treatment and other processing operations must be properly performed so as to not detrimentally affect the properties of the steel.

ASTM A1011 Hot Rolled Steel Sheet | Buy Online | Cut to ...

Features. A.K.A: Sheetmetal ASTM: ASTM A1011 (Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength) Alloy: Commercial Quality/A1011 Characteristics: Smooth, blue-grey finish. Workability: General purpose metal ideal for most processing techniques.[PDF]

PRODUCT GUIDES - Central Steel and Wire Company: …

Temper Pass. A temper mill is a steel sheet and/or steel plate processing line composed of a horizontal pass cold rolling mill stand. Goal is to correct shape differences along the width of the coil through cold forming. The end results/advantages of temper passing and leveling are listed below.

0.125" (11 GA) ASTM A1011 Hot Rolled STEEL SHEET - Online ...

Hot Rolled Steel Sheet A1011 (0.125" - 11 GA) is made of low carbon steel that is commonly found in most industries as it is a high strength, highly formable steel, commonly used to create drums, containers, and in general fabrication. Unlike cold rolled steel, Hot Rolled Steel Sheet A1011 has a rougher surface and with galvanization,...[PDF]

FLAT ROLLED PRODUCTS - ussteel

Hot Rolled Sheet Steel Hot Rolled Sheet Steel is an unprocessed, mill edge coiled product and does not include any processing such as temper rolling, tension leveling, pickling, oiling or side trimming. Hot Rolled products are produced to ASTM Specifications A1011, A659, A635 or A1018. Product is …

European Standard astm a569 hot rolled carbon steel plate ...

Astm A569 Hot Rolled Carbon Steel Plate, Astm A569 Hot ... offers 825 astm a569 hot rolled carbon steel plate products. such as free samples. ASTM A1008 / A1008M - 16 Standard Specification for Steel ..... bake hardening index, carbon steel sheet, cold-rolled steel sheet ... but are not provided as part of the standard. ASTM ...[PDF]

CHATHAMSTEELCORPORATION 25 HOT ROLLED BLACK …

chathamsteelcorporation 25 hot rolled black sheets commercialqualitya-569 size(in.) nom.thickness weightpersheet ... standard weight of gauges uncoatedsheets ... hot rolled carbon steel plates regularquality.33max.carbon astma283graded

Astm A1011 Wholesale, Astm Suppliers - Alibaba

Alibaba offers 4,303 astm a1011 products. About 2% of these are steel sheets, 1% are pipe fittings. A wide variety of astm a1011 options are available to you, such as aisi, astm.[PDF]

Standard Specification for Steel, Sheet, Carbon, …

A Hot-rolled sheet in coils and cut lengths less than 300 mm. in width must have cut edges. Hot-rolled material with mill edges 300 mm and less in width is considered hot-rolled strip. (2) Hot-rolled high-strength low-alloy steel sheet is com- monly classified by …

European Standard astm a569 hot rolled carbon steel plate ...

Hot Rolled Carbon Steel | European Standard Good Quality Astm A569 Hot Rolled Carbon Steel Plate ... Europe Standard Carbon Hot Rolled Steel Sheet S235JR Steel hot rolled steel sheet S235JR-B A283 GRC astm a283 grc hot rolled carbon steel plate S235JR-B A569,US $ 390 European standard for hot-rolled structural steel.

ASTM A1011 steel plates - carbon-steeltube

we promise we can offer you the qualified ASTM A1011 steel plates at the competitive price and rapid delivery time.We can produce as our customer's requirement.We keep many ASTM A1011 steel plates stock in our warehouse, So hereby, we sincerely hope you join us, let's join hands to make you be the No.1 in your local steel market.[PDF]

Standard Specification for Steel, Sheet and Strip, Hot ...

Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength1 This standard is issued under the fixed designation A 1011/A 1011M; the …

ASTM A569 hot rolled carbon steel plate carbon steel …

Katalor is a professional ASTM A569 hot rolled carbon steel plate carbon steel sheet supplier in China. Email:[email protected] ... Standard Specification for Steel, Sheet … ASTM-A1011 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved ...[PDF]

CARBON STEEL PRICE BOOK - aksteel

Structural Steel (SS) Steel of this quality is defined in ASTM Standards A1011 and A1018 for Hot Rolled and ASTM A1008 for Cold Rolled and is equivalent to the former Structural Quality. These products are produced to specified mechanical properties. The properties are obtained through control of …

Plate & Sheet | PDM Steel Service Centers, Inc.

Hot Rolled ASTM-A1011 Structural Steel in Grades 33, 36, 45, 50. Structural Steel Grades may be specified and are used in applications where engineered or specific physical properties are required. Increasing grades may reduce ductility.

astm a1011 steel plates - Alibaba

Alibaba offers 472 astm a1011 steel plates products. About 26% of these are steel sheets, 8% are stainless steel sheets. A wide variety of astm a1011 steel plates options are available to you, such as aisi, astm, and gb.

ASTM A1011/A1011M : Standard Specification for Steel ...

ASTM A1011/A1011M : Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High- Strength Low-Alloy, High-Strength Low-Alloy …

ASTM A1011 - SSAB - SSAB high-strength steel

ASTM A1011. The A1011 specification is the Standard Specification for light gauge Hot-Rolled Sheet and Strip Carbon(CS and DS), Structural(SS), High-Strength Low-Alloy(HSLAS), High-Strength Low-Alloy with Improved Formability(HSLAS-F), and Ultra-High Strength(UHSS) steels in thicknesses up to 0.230"(6 mm) in coil form.

Cold Rolled Steel Sheet | Cold Rolled Steel Plate

Your #1 Source for Hot & Cold Rolled Steel Sheet and Plate. We stock steel sheet and plate in 36”, 48”, and 60” widths and in 96”, 120”, and 144” lengths. We can also provide custom cut-to-size sheet and plate to fit your exact specifications. View our inventory below to find the hot or cold rolled steel plate and sheet you need, or use the filters at left to narrow your search.

Astm A1011 Carbon Steel Plate - alibaba

Astm A1011 Carbon Steel Plate , Find Complete Details about Astm A1011 Carbon Steel Plate,Astm A1011 Carbon Steel Plate,Hot Rolled Steel Plate,Carbon Steel Plate from Steel Sheets Supplier or Manufacturer-Qingdao Quanlong Metal Materials Co., Ltd.

Cold Rolled Carbon – Olympic Steel

olysteel› ProductsHome / Products / Cold Rolled Carbon Cold Rolled Steel Products We commonly stock commercial quality (CQ), AHSS Advanced high strength steel, drawing steel (DQ), COR-TEN® weathering steel, 1/4 Hard and 1/2 Hard, automotive grades, and more cold rolled steel coil and sheet products.[PDF]

ASTM-AISI THICKNESS TOLERANCE RANGES H.R. FLAT …

Various ASTM Specs for Steel Sheets A366 Cold Rolled Commercial Quality A569 Hot Rolled Commercial Quality A570 Hot Rolled Structural Quality A526 Zinc Coated (Galvanized) Steel A526/A527 Galvanneal A591 Electrolytically Zinc Plated

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.