Tel: +86-371-86151827

hot dip steel coil sheet strip

Steel grade:hot dip steel coil sheet strip

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot dip steel coil sheet strip Introduction

Hot-dip galvanized steel strip - Voestalpine

Hot-dip galvanized steel strip is as flexible as our customers. Our material is produced in five hot-dip galvanizing lines in Linz with various zinc coatings, surface qualities and post-treatments such as oil, passivation or anti-fingerprinting. Delivered in coils as slit strip or cut shapes

Hot Dip Steel Strip Steel Coil - w3s.in

Steel Coil, Steel Sheet, Steel Strip, Hose Clamp ... Tianjin Furuilong Metal Products Co., Ltd (Former as Tianjin Furuixin Steel Factory) is a professional manufacturer that specialize in producing, processing and distributing of Cold Rolled Steel Coil and Sheet, Hot Dip Galvanized Steel Coil and Sheet…

Hot Dip Steel Coil Steel Coil - hopkinsplasticsurgery

Continuously Hot-Dip Coated Steel Strip and Sheet ... Any request for Hot Dip Steel Coil Steel Coil Email:[email protected] and Whaisapp:0086-130-83697781. Related Products. Quick and Easy Installed Prefab Steel Frame Cabin. High Quality Round Steel Bar Large in Stock.

Hot Dip Galvanize Steel - Zero Spangle Galvanized Steel ...

Hot Dip Galvanize Steel. We are a leading Manufacturer of zero spangle galvanized steel coil, galvalume steel coils, galvanized steel strips, galvanized strip, galvanized steel tapes and galvanized steel strip from Mumbai, India.

Hot Dip Galvanized Steel Coil/Strip - unionsteelgroup

15) Features: Hot dip galvanized steel coil/strip features excellent forming properties, paintability, weldability, and is suitable for fabrication by forming, pressing and bending. It is also Environmental Friendly resource because of its longevity in corrosion protection, low …[PDF]

Hot-Dip Zinc-Coated Steel Coils - csvc.vn

Features of Hot-Dip Galvanized Steel Coils Hot-dip Galvanized steel sheets are widely used in modern society, such as automobile parts, computer case, architecture material, household appliance and so on. To meet the multiple requirements, the specification of hot-dip Galvanized steel …

Hot Dipped Galvanized Steel Coil Sheet Supplier China ...

What is Galvanized Steel. Galvanized Sheet is carbon steel sheet coated with zinc on two sides by a continuous hot-dip process. This method tightly adheres the coating to the steel with an iron-zinc alloy bonding layer formed by a diffusion process while the heated steel strip is …User rating: 4.5/5

Hot Dip Cold Rolled, Hot Dip Cold Rolled Suppliers and ...

Alibaba offers 52,899 hot dip cold rolled products. About 63% of these are steel sheets, 1% are stainless steel sheets. A wide variety of hot dip cold rolled options are …[PDF]

Continuously Hot-Dip Coated Steel Strip and Sheet

Hot-dip coated steel strip and sheet is quality steel thin s heet protected from corrosion by a firmly adhering metallic coating. In this do cument, the standards ... 3.1.1 Strip (Coil) The strip is usually delivered with an inner coil diameter of 610 mm. Z zinc coating Widths from 600 to 2,000 mm[PDF]

hot dip galvanized steel strip - Gruppo Arvedi

The coil is further finished on pickling and hot dip galvanising plants which ... The hot dip galvanized steel produced by Acciaieria Arvedi combines the excellent characteristic of protection from corrosion with the guarantee of the quality of the underlying steel. Arvedi hot dip galvanized steel strip Chemical passivation oiled Ch+oil ...

JIS G 3302 Galvanized Iron Sheet - stainless steel sheet ...

as galvanized, galvannealed,aluminized and copper-plated steel sheet and strip; . JIS G3302(1994)HOT-DIP ZINC-COATED STEEL SHEETS AND COILS. Galvanized Steel - Welcome Yajabey. Hot-Dip Galvanized Steel (GI: Zinc Coated Steel) Aluminum-plates the zinc Specifications, JIS G3302 1998, ASTM A653M / A924M 1998. SGCC SGC 340400

Hot Dip Galvanized Steel Coil Strips Wholesale, Steel Coil ...

Alibaba offers 7,636 hot dip galvanized steel coil strips products. About 33% of these are steel strips, 1% are cable ties. A wide variety of hot dip galvanized steel coil strips options are available to you, such as free samples, paid samples.

Steel Coil, Steel Sheet, Steel Strip, Hose Clamp ...

Tianjin Furuilong Metal Products Co., Ltd (Former as Tianjin Furuixin Steel Factory) is a professional manufacturer that specialize in producing, processing and distributing of Cold Rolled Steel Coil and Sheet, Hot Dip Galvanized Steel Coil and Sheet, Pre-painted Steel Coil and Sheet, Steel …[PDF]

Product Type & Applicable Specifications Description …

Description Hot-Dip Galvanized (HDG) Flat Steel (Coil/Strip/Sheet) Product Size & Form in Hot-Dip Galvanized Material 0.28 - 4.00 0.28 - 4.00 0.30 - 4.00 0.30 - 4.00 900 - 1500 650 - 1500 30 650 - 1500 Coil form / Sheet Coil form / Sheet Coil form / Sheet Coil form / Sheet Mill Edge Trimmed Edge Slitted Coil Trimmed Edge

Quality Galvanized Steel Coil & Hot Dip Galvanized Steel ...

LINKIN MERCHANDISE LIMITED is best Galvanized Steel Coil, Hot Dip Galvanized Steel Coil and Hot Dip Galvanized Steel Strip supplier, we has good quality products & service from China.

hot dipped steel strip coil - hopkinsplasticsurgery

Hot Dip Galvanized Coil Steel Strip, Hot Dip Galvanized ...A wide variety of hot dip galvanized coil steel strip options are available to you, such as aisi, astm, and gb. You can also choose from cold rolled, hot rolled. As well as from iso, sgs, and bv. And whether hot dip galvanized coil steel strip is coil, or plate. There are 7,626 hot dip galvanized coil steel strip suppliers, mainly ...

Quality Hot Rolled Plate Steel & Hot Rolled Steel Strip ...

EN 10025-2 S235JR Hot Rolled Sheet Steel , 6000 - 24950mm Hot Rolled Carbon Steel. Hot Dipped Galvanized Steel Coil. Hot Dip Galvanised Steel Coil , ISO9001 High Grade Galvanised Sheet And Coil. Regular / Large Spangle Hot Dipped Galvanized Steel Coil Z60g - Z275g. SGCH Hot Dipped Galvanized Steel Coil 750 - 1500mm Width 60 - 600g Zinc Layer

AIYIA Hot dipped galvanized steel coil /sheet / plate ...

Aiyia Hot Dipped Galvanized Steel Coil /sheet / Plate Strip,Gi,Hdgi,Zinc Coated Steel,Galvanized Price , Find Complete Details about Aiyia Hot Dipped Galvanized Steel Coil /sheet / Plate Strip,Gi,Hdgi,Zinc Coated Steel,Galvanized Price,Galvanized,Galvanized Steel,Galvanized Steel Coil from Supplier or Manufacturer-Shanghai Aiyia Industrial Co., Ltd.

The skip plating defects of hot dip galvalume steel sheet ...

A. Reasons. 1. The wettability of Al-Zn-Si melt and steel is much worse than pure Zn melt. At the same time, as the drastically increase of plating bath temperature and the aluminum content, the manufacturing technique of hot dip galvalume steel sheet has undergone fundamental changes. …

S250gd S550gd Cold Rolled Hot DIP Galvanized Steel Strip

Steel Strip, Steel, Zinc Steel Strip manufacturer / supplier in China, offering S250gd S550gd Cold Rolled Hot DIP Galvanized Steel Strip, St37-2 Ss400 Hot Rolled Mild Steel Checkered Plate, Q235 Mild Low Carbon Steel Hot Rolled Steel Coil and so on.

PPGI steel for sale,ppgi coil for sale,ppgi steel sheet ...

Regular Spangle,Minimized Spangle,Zero Spangle HOT-dip galvanized steel coil supplier . ... hot dip galvanizing narrow strip . FULITAI STEEL GROUP. We are professional in Pre-painted galvanized steel sheets/coils(PPGI),Pre-painted Aluminum Zinc Steel Coils/Sheet(PPGL),higt quality of for …[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

Coated Steel Sheets of Nippon Steel & Sumitomo Metal Corporation weldability, paintability, and various other properties as ... steel sheet and strip Hot-dip galvanized steel sheet and strip Hot-dip aluminum-coated steel ... Cold-rolling mill Cold-rolled coil Welder Cleaning tank Galvanizing bath Post treatment Drying Shear Continuous annealing ...

Hot-dip Galvanized Steel Sheets(GI) | Galvanized Steel ...

Hot-dip galvanized steel sheets (GI) are produced by passing the full hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. GI has a thicker galvanized layer which has excellent anti-corrosion qualities, and is the type of steel sheet used most commonly. ...

Galvanized steel sheets/coils,Corrugated Steel Sheet ...

Hot dip galvanized steel coil Chinese supplier prepainted factory price ; Zinc aluminium coated roofing sheet China galvalume steel coil az150 electro g40 galvanized plate ; Low price prepainted galvalume steel PE paint or color coated factory standard PPGL steel coil sheet or strip

Aluminized Steel & Aluminum ... - Rolled Steel Products

Available in sheet and strip. Aluminized Steel ASTM A-463. This specification covers aluminum-coated steel sheet in coils and cut lengths available with two types of aluminum coating applied by the hot-dip process, with several coating weights. The heat analysis of the base metal shall conform to the requirements specified.

CoilWorld: Passivated Steel: The Debate Over Paintability

____ Galvanized steel coil produced on hot-dip galvanizing lines has an aluminum oxide layer deposited on the surface of the metal. This is a result of the aluminum that is used to inhibit the zinc-iron alloying reaction and it forms very rapidly when the strip exits the zinc pot.

Hot Dip Galvanized Steel Coil (GI Coil) – Jiang Lin Steel ...

Hot Dip Galvanized Steel Coil (GI Coil) Hot dip galvanizing is a process of coating steel with a thin zinc layer, which serves as a barrier between the steel and the environment. The finish is applied by passing the steel through a molten bath of zinc at a high temperature.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.