Tel: +86-371-86151827

1 5 50mm thickness carbon boiler pressure vessel plate

Steel grade:1 5 50mm thickness carbon boiler pressure vessel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

1 5 50mm thickness carbon boiler pressure vessel plate Introduction

Carbon Vessel A515M P235GH Steel Plate Thickness 1 5mm …

Carbon Vessel A515M P235GH Steel Plate Thickness 1 5mm to 200mm. Notes: A - heat analysis, B - product analysis, C - For each reduction of 0.01% below the specified maximum for Carbon, an increase of 0.06% above the specified maximum for Managanese is permitted, up to a maximum of 1.50% by heat analysis and 1.60% by product analysis, D - Plates 12.5 mm and under may have 0.85 - 1.20% …

Pressure Vessel Steel Plate Thickness, Pressure Vessel ...

There are 398 pressure vessel steel plate thickness suppliers, mainly located in Asia. The top supplying countries are China (Mainland), Germany, and India, which supply 96%, 3%, and 1% of pressure vessel steel plate thickness respectively. Pressure vessel steel plate thickness products are most popular in Southeast Asia, Mid East, and Africa.

What is Carbon Steel Plates, and Things You Must to Know

1. ASTM A36 plates – The most common standards of carbon steel plate 2. ASTM A283 Grade A, B, C – Also most common material in carbon structural. 3. ASTM A516 – For boiler, vessel steel plate. 4. ASTM A537 – For heat treated carbon steel plate in fusion welded pressure vessels and structural steel plates. 5.

Hr Carbon Steel Plate Pressure Vessel - srilankasports.org

Steel Plate Grades . Pressure Vessel Quality steel plate is produced to tightly controlled ASTM standards in order to provide superior grade of carbon steel plate designed specifically for pressure vessel and boiler applications but also suited to a variety of less demanding commercial applications.

Carbon Steel Plate Manufacturer and Supplier | Superior Steel

Carbon Steel Plates. Carbon Steel Plates has been defined as a metal sheet with a thickness of .2300" or more; Carbon Steel Sheets is defined as metal that is thicker than foil and less than .2300".Due to its higher thickness, CS Plates is used for products that require durability and strength but do not require the lower weight of a thinner metal sheet.

Boiler and Pressure Vessel A204Gr.A\B\C Steel Plate

Carbon Boiler&pressure Vessel Steel Plate | 1.5-50mm Thickness ... Boiler and Pressure Vessel A204Gr.A\B\C Steel Plate. ASTM A204 Grade B welded steel, ASTM A204grA/B/C steel ... Molybdenum alloy boiler steel plate A204 Grade B contains a higher Carbon than boiler steel plate A204 Grade A,so pressure vessel steel plate A204 Grade B ownd a ...

What is Carbon Steel Plates, and Things You Must to Know

1. ASTM A36 plates – The most common standards of carbon steel plate 2. ASTM A283 Grade A, B, C – Also most common material in carbon structural. 3. ASTM A516 – For boiler, vessel steel plate. 4. ASTM A537 – For heat treated carbon steel plate in fusion welded pressure vessels and structural steel plates. 5.

Boiler and Pressure Vessel A204Gr.A\B\C Steel Plate

Carbon Boiler&pressure Vessel Steel Plate | 1.5-50mm Thickness ... Boiler and Pressure Vessel A204Gr.A\B\C Steel Plate. ASTM A204 Grade B welded steel, ASTM A204grA/B/C steel ... Molybdenum alloy boiler steel plate A204 Grade B contains a higher Carbon than boiler steel plate A204 Grade A,so pressure vessel steel plate A204 Grade B ownd a ...

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon Steel Plate

Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

Boiler and Pressure Vessel Steel Plate

Requirements for Boiler and Pressure Vessel Manufacture Licensing · PDF 1 / 27 Requirements for Boiler and Pressure Vessel Manufacture Licensing Chapter 1 General Provision Article 1 The Requirements for Boiler and Pressure Vessel Manufacture Licensing are specially formulated in accordance with relevant requirements in the ...

A515 Grade 65 thickness - MS Plates - napmr.org

Pressure Vessel Plates, Carbon $41.00ASTM A515 grade 65 steel plate is one of our main products.ASTM A515 grade 65 Pressure vessel steel plate is a kind of steel plates material.ASTM A515 grade 65 steel plate is used to build boilers and pressure vessels such as petroleum.Gangsteel is specialized in supplying ASTM A515 steel plate in A515 Grade ...

Hot Rolled Alloy Carbon Steel Plate 350 480 ton

A steel, other than a carbon steel or an interstitial-free steel, that conforms to a specification that requires the minimum content for each specified alloying element to be lower than the applicable limit in the definition for alloy steel. 1.5-50mm thickness carbon boiler-- bebon - plate-steel. Learn more

ASme SA28 - pressure-vessel-steel

5.15 °C Installation temperature : + 4 °C Max design pressure : 3.1 5.4 barg Normal operate temperature : 5.1.5 ASME B31.6 + 395 °C Weight of contents The weight of the contents given in the process line list is 0.3 Allowable stress cold 138 Mpa Allowable stress hot 75 Mpa Piping dimensions NPS [in] OD [mm] wt [mm] Corrosion Allow.

Pressure Vessel Steel Plate - broadsearch.in

Carbon Steel Plate. Masteel supplies superior quality carbon steel plate for boiler and pressure vessel fabrication which is perfectly suited to the high standards set by the oil, gas, and petrochemical sectors, which is why they stock a wide range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

pressure vessel plate - steel grade steel material

1.Pressure Vessel Steel Plate ASTM A516 2.A516 Grade 70 is a pressure vessel/boiler quality grade steel used throughout the petrochemical, oil and gas industry.ASTM A516 Grade 70 is a boiler and pressure vessel quality steel which is ideal for moderate and lower temperature service. Steel Grade,Boiler & Pressure Vessel Plate - Steel grades

hot rolled A302 material price-BBN STEEL Pressure Vessel ...

Plates may be ordered normalized or stress relieved, or both. If A 302 Grade B above 50mm in thickness shall be normalized. Carbon Hot Rolled Plate Steel Thickness 6mm - 300mm … ASTM A283 Hot Rolled Steel Coil 1.5 - 25.4mm Coil Thickness Black Surface Customized Length Hot Rolled Steel Sheet In Coil Cold Rolled Base Material Request A Quote

SA516 Gr 70 Carbon Steel Boiler Plate Suppliers and ...

Champak steel is a exporters and Stockholders of ASME SA 516 Gr 70 Plates, SA516 Gr.70 Carbon Steel Plate, ASTM A516 Grade 70 pressure vessels Plates, A516 Gr.70 Boiler Steel Plate, A516 Grade 70 Welded Steel Plates

ASTM A517 Boiler Pressure Vessel Steel cutting plate ...

Offer helical blade and forged ring,steel machining,ASTM A517 Boiler Pressure Vessel Steel cutting plate price,offer steel machining service,steel cutting,steel bevel,steel milling,steel cutting,steel welding,steel bending.

ASME SA515 Grade 70 steel grade factory-BBN STEEL sale ...

Superior Steel Oveseas is highly acclaimed manufacturer, supplier & exporter of ASTM A516 GR.70 Plates.We supply high quality Carbon Steel ASME SA516 GR.70 Plates for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry. ASTM A516 Grade 70 Plate is an excellent ...

Steel Material,Steel Grade, Carbon steel Plate Grades ...

Ordinary carbon steel only contains carbon as the main element in influence steel mechanical properties, in fact limited amount of manganese and silicon also exist in carbon steel plate and pipe products, and as the raw material contains elements of small quantities, such as nickel, chromium, aluminium, molybdenum and copper, and the bad impurities phosphorous and sulphur.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.