Tel: +86-371-86151827

s355jr tata plate

Steel grade:s355jr tata plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s355jr tata plate Introduction

[PDF]

S355JR+AR Durbar® S355JR+AR is a ... - Tata Steel Europe

S355JR+AR. Durbar® S355JR+AR is a strong, robust floor plate offering a range of benefits including scope to reduce construction costs. Floor plate with structural integrity. Durbar® S355JR+AR is part of Tata Steel’s range of hot-rolled structural steel floor plate.

s355jr plate suppliers, steel plate s355jr, tata steel ...

S355JR Hot rolled plate manufacturers in Rajkot, Gujarat, Tata steel s355jr stockholder in India, S355JR Steel Plate wholesaler in India & UK As an established S355jr plate suppliers, we source our S355JR Steel Plate material globally from approved mills and offer a …

supplier of tata steel s355jr,A36,Q235B,Q345B steel plate ...

S355JR+AR Durbar® S355JR+AR is a - Tata Steel Europe. S355JR+AR Durbar® S355JR+AR is a strong, robust floor plate offering a range of benefits including scope to reduce construction costs Floor plate with structural integrity Durbar® S355JR+AR is part of Tata Steel’s range of hot-rolled structural steel floor plate. Extensively tested and …

Beverly Steel - S355JR Steel Plate

S355JR steel plate min thickness 3mm up to max 400mm Origin : Malaysia, Indonesia, Korea, Japan, Taiwan and China. We can exclusively produce steel plate thickness 5mm X width 2000mm X your choice of length. Beverly Steel (Malaysia) Sdn Bhd .

S355JR datasheet, S355JR property, S355JR standard ...

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S355JR can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

S355JR Structural Steel & Steel Plate | Murray Steel Products

S355JR steel plate and structural steel is available in a wide range of sizes from Murray Steel Products, along with associated processing services, including profiling, cutting and drilling.

supplier of tata steel s355jr,A36,Q235B,Q345B steel plate ...

S355JR+AR Durbar® S355JR+AR is a - Tata Steel Europe. S355JR+AR Durbar® S355JR+AR is a strong, robust floor plate offering a range of benefits including scope to reduce construction costs Floor plate with structural integrity Durbar® S355JR+AR is part of Tata Steel’s range of hot-rolled structural steel floor plate. Extensively tested and …

Structural Steel - EN10025 S275, S355JR and S355JO

S335JR - an useful structural grade steel with a minimum yield strength of 355 N/mm². S355 being widely used in the structural engineering and construction industries, S355 offers high yield and tensile strength and is supplied with a variety of treatments and test options to ensure that it is a highly usable steel in your various projects.

S355JR Structural Steel & Steel Plate | Murray Steel Products

S355JR steel plate and structural steel is available in a wide range of sizes from Murray Steel Products, along with associated processing services, including profiling, cutting and drilling.

High Strength Low EN 10025 S355JR Steel Plate Supplier ...

EN 10025 S355JR Plates Manufacturer. Marc Steel is a recognized trader and manufacturer of EN 10025 S355JR Plates, which has a number of excellent features to provide like accurate dimension, quality approved, robustness, and more.EN 10025 S355JR Plates Moreover, these High Tensile EN 10025 S355JR Plates is obtainable in numerous dimensions and also can be modified according to …

EN 10025-2 S355JR high strength structural steel plate ...

EN 10025-2 S355JR High Yield Strength Structural Steel Plate . S symbol for Structural Steel. JR symbol 20 temperature impact test. J0 syambol 0 temperature impact test. J2 symbol -20 temperature impact test . S355JR Characteristic. S355JR is a low carbon, high tensile strength structural steel which can be readily welded to other weldable steel.

S355JR datasheet, S355JR property, S355JR standard ...

This page provides S355JR datasheet download, these include S355JR mechanical properties, chemical element S355JR , technical specifications of S355JR steel material properties. S355JR …

s355jr plate suppliers |S355JR+N Plate Stockist

Under DIN EN10025-2 standard Number: 1.0045 S355JR steel plate/sheet is used to manufacture the plants of factory ,the commonconstructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.[PDF]

Structural Steel Plate and Strip to EN 10025

General description. ArcelorMittal South Africa produces and markets hot rolled structural steel plate and coil to EN 10025 in the following thickness ranges: Plate = 5mm - 100mm Coil from 1,6mm - 13mm. (Vanderbijlpark) Coil from 1,5mm - 6mm.

s355jr steel plate - alibaba

Alibaba offers 3,827 s355jr steel plate products. About 89% of these are steel sheets, 2% are stainless steel sheets. A wide variety of s355jr steel plate …

S355 S355J2 S355J2+N Steel - UK Supplier

West Yorkshire Steel are S355 stockholders and suppliers of flame cut plate, round bar and flat bar. This steel grade can be supplied to your required sizes as one offs or multiple cut pieces. Flame cut plates can also be Lumsden ground to size on thickness. Contact our experienced sales team who will assist you with your S355 carbon steel enquiry.

EN10025 2 Specification-S235-S275-S355 Steel Plate

S235 Steel Plate. S275 Hot Rolled Steel Plate. S355 Rectangular Steel Pipe. AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for …

S355JR Steel Grade, Mechanical Properties, Chemical ...

S355JR Steel Grade, Mechanical Properties, Chemical Composition, Grade Equivalent Standard: EN 10025-2:2004, European standard for hot-rolled structural steel. Part 2 - Technical delivery conditions for non-alloy structural steels.

Material selection and product specification ...

Steel material is supplied in two product forms – ‘flat products’ (steel plate and strip) and ‘long products’ (rolled sections, either open beams, angles, etc or hollow sections). For structural use in bridges these products are inevitably cut (to size and shape) and welded, one component to another.In the structure, the material is subject to tensile and compressive forces.

Beverly Steel - S355J2+N Steel Plate

S355J2+N High Tensile Steel Plates S355 – offers high yield and THE BEST WEIGHT LOSS PILLS tensile strength with a minimum yield strength of 355 N/mm² , a structural grade steel which is widely used in engineering and construction industries, can be supplied with a variety of treatments and test options to ensure that it is a highly usable ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.