Tel: +86-371-86151827

asme sa516 sa516m steel plate dealer

Steel grade:asme sa516 sa516m steel plate dealer

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

asme sa516 sa516m steel plate dealer Introduction

Asme sa516 grade 70|sa516 grade 60 steel plate specification

Delivery State: SA516-70n reffers to normalized steel plate product, for steel plate and sheet thinner than 40mm we normally supply them as rolled-steel coil. Plates with thickness above 40mm are supplied normalized. SA516 grade 70 steel plate density is 0.284 cu/in3 (7861 kg/m3).. Mild test: ASME SA 516-carbon steel plates are manufactured with mill certification following EN10204 3.1 or ...

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon …

Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.Masteel UK Ltd · Azom Admin[PDF]

ASME SA516 / ASTM A516 Boiler Plates - Regency Steel …

Supplementary Requirement 517, Vacuum Carbon-Deoxidized Steel, in Specification A 20/A 20M. 7. Mechanical Requirements 7.1 Tension Test Requirements - The material as represented by the tension-test specimens shall conform to the requirements shown in Table 2. ASME SA516 / ASTM A516 Boiler Plates 8 Cross Street #24-03 PWC Building Singapore 048424

ASME SA516 Gr 60 pressure vessel steel - pressure vessel ...

ASME SA516/ SA516M Grade 485 Pressure Vessel Steel Plate. TJC Steel( owned by TJC Iron&Steel (Group) Co., Limited) is the most competitive manufacture and supplier of ASME SA516/ SA516M Grade 485 Pressure Vessel Steel Plate in China. For more details, please contact us freely. ... ASTM A 516 Gr.60 Plate Dealer . ASME SA516 low alloy steel plate ...

ASME SA516/SA516M - steel-plate-sheets

asme sa516/sa516m Main Application: Pressure Vessel And Boiler Steel Plate is Widely Used In The Fabrication Of Boilers And Pressure Vessel,Such As Petroleum, …

ASME SA516 Plate - SA516 Steel Plate Grades 60, 65, and 70 ...

universalsteelamerica› Steel Plate ProductsUniversal Steel stocks SA516 in the as-rolled, normalized, and HIC tested conditions, with thicknesses ranging from 3/16” up to 12.5” thick. SA516 material is available in grades 60, 65, and 70. Specialized testing and chemical or physical requirements vary depending on the specific final application of the steel plate.

Products / Boiler Steel Plate / ASME SA516 Steel Plate ...

ASME SA516 covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important, steel gra. English Chinese Espanol. ... Gangsteel is specialized in supplying ASME SA516 steel plate in SA516 grade 65,SA302 Grade D,SA517 Grade E. SA516Gr55|AMSE S.

ASME SA516,SA516 Steel - JOIN WIN STEEL - Steel Plate,HRC ...

How about the steel chemical composition of ASTM A516 Grade 70 steel plates ? What's the chemical composition of ASME SA516 Grade 70 steel plates? How about the steel chemical composition of ASTM A516 Grade 65 steel plates ? ASME SA542 Grade B Class 3 alloy steel plates for pressure vessels supplier; How about the steel chemical composition of ...

ASME SA516/ SA516M Grade 485 Pressure Vessel Steel Plate

TJC Steel( owned by TJC Iron&Steel (Group) Co., Limited) is the most competitive manufacture and supplier of ASME SA516/ SA516M Grade 485 Pressure Vessel Steel Plate in China. For more details, please contact us freely. Click Here to See PDF Details for ASME SA516/ SA516M Grade 485 Pressure Vessel Steel Plate

ASTM A516/ ASME SA516 PVQ Steel Plate | BBN Steel

PVQ Steel Plate. ASTM A516/ ASME SA516. SA516 is a carbon steel plate grade utilized primarily in welded pressure vessels for moderate to lower temperature service. This material is produced in grades 55, 60, 65 and 70. This material is also offered in the normalized condition where improved notch toughness is required.

ASME SA516 Grade 70| SA516 Grade 70 Plate| SA516 …

ASTM A516M or ASME SA516M ... ASME SA516 Grade 70 Standard steel plates are intended for use in pressure vessels where increased strength is is important. ASTM A516 Grade 70 steel is one of the most popular steels for boilers, pressure vessels and heat exchangers. It is excellent at low temperature and have good results on standard Charpy V ...

SA516Gr70|ASME SA516 Grade 70|SA516 Gr.70 STEEL PLATE ...

sa516gr70|asme sa516 grade 70|sa516 gr.70 steel plate ASME SA516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. ASME SA516 plates 40mm and under in thickness is normally supplied in the as-rolled condition.

ASME SA516,SA516 Steel - JOIN WIN STEEL - Steel Plate…

How about the steel chemical composition of ASTM A516 Grade 70 steel plates ? What's the chemical composition of ASME SA516 Grade 70 steel plates? How about the steel chemical composition of ASTM A516 Grade 65 steel plates ? ASME SA542 Grade B Class 3 alloy steel plates for pressure vessels supplier; How about the steel chemical composition of ...

ASTM A516 Grade 70 Plate, ASME SA516 GR. 70 Carbon Steel ...

RPF Pipes & Fittings - leading Suppliers of ASTM A516 Plates, ASME SA516 Grade 70 Plate, A516 Gr 70 Pressure Vessel Plates, ASTM A516 Gr.70 Boiler Plate, Carbon Steel A516 GR.70 Plates in …

ASME SA516 Grade 60, SA516 Grade 60 Plate, SA516 Grade …

Prosaic Steel and Alloys India Manufacturer & Fabricator, Importer, Stockholder, A516 Grade 60 HIC Resistant Steel Plates ASME SA516 GRADE 60, premier suppliers of bulk Boiler Quality Steel Plates. ASME SA516 GRADE 60. We Stock worldwide. Fast delivery guaranteed for every size Boiler Quality Steel Plates ASME SA516 GRADE 60.

ASME SA516 Grade 70 Carbon Steel Plate Stockist & …

ASME SA516 Grade 70 Carbon Steel Plates Stockist, Supplier & Exporter in Mumbai, Maharashtra, India. Pressure Vessels Plate, Boiler Plate Suppliers Mumbai ASTM A516 / ASME SA516 Grade 70 Resistant Steel Plates, CS Plates, Boiler Quality Plates Stockist & Suppliers.

ASME SA516 Grade 60(SA516GR60) Pressure Vessel And …

Position:Home >ASME SA516/SA516M>ASME SA516 Grade 60(SA516GR60) Pressure Vessel And Boiler Steel Plate . Steel Products. ... Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project. Steel Name: ASME SA516 Grade 60(SA516GR60) Boiler steel plate,ASME SA516 Grade 60(SA516GR60 ...

ASME SA516/70 As Rolled, Domestic Origin – Ranger Steel

ASME SA516/70 As Rolled, Domestic Origin. A pressure vessel quality plate (PVQ) for moderate and lower – temperature service. It is produced in grades 55, 60, 65 and 70, with Grade 70 being the most common and readily available from stock.

Products / Boiler Steel Plate / ASME SA516 Steel Plate ...

ASME SA516 covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important, steel gra. English Chinese Espanol. ... Gangsteel is specialized in supplying ASME SA516 steel plate in SA516 grade 65,SA302 Grade D,SA517 Grade E. SA516Gr55|AMSE S.

ASTM A516 Grade 60 and ASME SA516 Grade 60 Carbon Steel ...

Masteel stock a wide range of carbon steel plates according to ASTM A516 Grade 60 and ASME SA516 Grade 60, ideal for boiler and pressure vessel fabrication where improved notch toughness is important. technical details on these alloys are found herein.

ASME SA516/ SA516M Grade 70 Pressure Vessel Steel Plate

TJC Steel( owned by TJC Iron&Steel (Group) Co., Limited) is the most competitive manufacture and supplier of ASME SA516/ SA516M Grade 70 Pressure Vessel Steel Plate in China. For more details, please contact us freely. Click Here to See PDF Details for ASME SA516/ SA516M Grade 70 Pressure Vessel Steel Plate

ASTM A516 Grade 70 Plate,ASME SA516 GR.70 ,SA 516 Gr. …

ASTM A516 GR.70 Carbon Steel Boiler Quality Plates Manufacturer in India, GR.70 ASTM A516 CS Plates, CS SA516 Grade-70 Plate Stockist, ASTM A516 Grade 70 Pressure Vessel Steel Plates Distributors, GR.70 Carbon Steel ASME SA516 Plate Exporter, ASTM A516 Grade 70 Carbon Steel HR Plate Dealer,SA516 Grade-70 CS Hot Rolled Plates Manufacturer & Suppliers.

ASTM A516 Grade 65 Plates, ASME SA 516 GR.65, SA516 …

ASTM A516 Grade 65 Pressure Vessel Steel Plates Manufacturer in India, GR.65 ASTM A516 CS Plates, CS SA516 GR.65 Plate Stockist,ASTM A516 GR.65 Carbon Steel Boiler Quality Plates Distributors, GR.65 Carbon Steel ASME SA516 Plate Exporter, ASTM A516 Grade 65 Carbon Steel HR Plate Dealer,SA516 CS Hot Rolled Plates Manufacturer & Suppliers.

SA516 Gr 70 Carbon Steel Boiler Plate Suppliers and ...

Champak steel is a exporters and Stockholders of ASME SA 516 Gr 70 Plates, SA516 Gr.70 Carbon Steel Plate, ASTM A516 Grade 70 pressure vessels Plates, A516 Gr.70 Boiler Steel Plate, A516 Grade 70 Welded Steel Plates

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.