Tel: +86-371-86151827

cold rolled gi hot dip galvanized steel sheet in coil from c

Steel grade:cold rolled gi hot dip galvanized steel sheet in coil from c

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

cold rolled gi hot dip galvanized steel sheet in coil from c Introduction

Hot Dip Galvanize Steel - Zero Spangle Galvanized Steel ...

Hot Dip Galvanize Steel. We are a leading Manufacturer of zero spangle galvanized steel coil, galvalume steel coils, galvanized steel strips, galvanized strip, galvanized steel tapes and galvanized steel strip from Mumbai, India.

Steel Dynamics, Inc. - Hot Rolled Galvanized Steel Sheet

Material Specifications. ASTM A 653 hot-dipped galvanized carbon steel sheet ASTM A 1003 hot-dipped galvanized carbon steel sheet for cold-formed framing members SAE J1392 hot-dipped galvanized, high-strength, low-allow carbon steel sheet SAE J403 hot-dipped galvanized carbon sheet steel ASTM A929 hot-dipped galvanized steel sheet...

Hot Dipped Galvanized Steel Sheet & Coil | Alliance Steel

alliancesteel.net› Products› Coated SteelHot dip galvanizing is a process of coating steel with a thin zinc layer, which serves as a barrier between the steel and the environment. The finish is applied by passing the steel through a molten bath of zinc at a high temperature. Alliance Steel’s hot dipped galvanized steel service capabilities include slitting, shearing, blanking, degreasing and brushing, stretcher leveling and metallurgical support.

Galvanized Vs. Cold Rolled Steel | Hunker

Although cold-rolled steel can be galvanized, products you buy that are made from galvanized steel may also have been formed through hot-rolling. Compared to cold-rolling, hot-rolled steel has higher yield strength and less grain deformation, because the cold-rolling squashes the steel so that the microscopic "grain structure" resembles an oval ...

Hot Dipped Galvanized Coil - galvanized-steel

GI steel sheet coil are made of hot - rolled strip or cold - rolled strip.After crosscut with rectangular plate supplies for hot galvanized sheet;A hot galvanizing coil supplied in rolls. To prevent corrosion on the steel surface to extend its service life, the steel surface...

Hot Dipped Galvanized – Rolled Steel Products « Rolled ...

Hot Dipped Galvanized – sheet or strip steel bathed in a molten solution containing not less than 98% pure zinc to uniformly coat for corrosion resistance. The coating is not intended to withstand outdoor exposure without chemical treatment or painting. Sheets are produced as commercial quality, drawing quality, drawing quality special killed, structural, physical quality, and are available ...

Hot Dipped Galvanized Steel Coil Sheet Supplier China ...

It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristic. Usually galvanized steel sheet and galvanized steel coil process and specifications are basically the same. Hot-dip galvanizing is the process of applying a protective zinc coating to steel sheet or iron sheet…User rating: 4.5/5

Galvanized Steel Coil & Sheet, China GI Manufacturer - …

hengze-steel› Sheet & CoilHot Dipped Galvanized Steel Coil and alloying Galvanized Coil have excellent performance, possessing ideal comprehensive properties of corrosion resistance, formation and coating.. Galvanized steel (GI) are mainly used in building, automobiles, metallurgy, electric equipments and more. Building – roof, door, window, roller shutter door and suspended skeleton

Galvanized Steel Sheets || Galvanized Steel Coils ...

As a registered ISO 9001:2008 company, Rolled Steel Products state of the art equipment meets virtually any requirement in panel flat quality leveling, precision slitting, close tolerance sheet blanking, strip quality edge conditioning, precision shearing and complete cold reducing capabilities.

ZINCGRIP GI Steel | Hot Dip Galvanized Steel

Hot Dip Galvanized Steel. ZINCGRIP ® Steel is continuously coated on both sides with a zinc coating, using a hot dip process that we originally pioneered. With its tight metallurgical bond between the steel and the coating, ZINCGRIP Steel provides the strength and formability of steel plus the corrosion protection of zinc.

Hot-dip Galvanized Steel Sheets(GI) | Galvanized Steel ...

Hot-dip Galvanized Steel Sheets (GI) Hot-dip Galvanized Steel Sheets Hot-dip galvanized steel sheets (GI) are produced by passing the full hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface.

Galvanized steel sheets/coils,Corrugated Steel Sheet ...

FULITAI STEEL GROUP is China's leading supplier dedicated to providing its customers with the quickest quotes, best quality products, most competitive prices and fastest possible deliveries of pre-painted steel coils, galvanized steel coil/sheets, metal roofing tiles,Corrugated Steel Sheet,Aluminum Zinc Steel Coils/Sheet,Pre-painted Aluminum ...

Steel Dynamics, Inc. - Hot Rolled Galvanized Steel Sheet

We galvanize both hot-rolled and cold-rolled steel sheet in various widths and gauges. Our hot-rolled galvanized steel sheet provides a cost-effective solution for heavy-gauge, unexposed applications. Our hot-rolled galvanized steel sheet has a spangle-free finish.

Prime Hot Dipped Galvanized Steel Sheet in Coils (HDGI ...

On Wednesday, Nucor Sheet Group announced a $30 per ton ($1.50/cwt) price increase on hot rolled, cold rolled and galvanized steels. The base price increase was to take effect immediately and was the second $30 per ton increase announced since the beginning of the New Year.

Galvanized Steel(GI) | Dana Steel UAE - Adding Value to ...

Galvanized Iron (G.I) Hot dipped galvanized steel is produced by passi ng cold rolled steel through a molten bath of Zinc at temperatures around 460 °C. The Zinc acts as a physical barrier between the atmosphere and the surface of the metal. Further, due to its lower chemical potential than iron, it is attacked and dissolved first,...

JIS G 3302 Galvanized Cold Rolled SGCC Steels

SGCC steel is a soft forming quality hot dip galvanized steel. SGCC is a material grade and designation defined in JIS G 3302 standard. JIS G 3302 is a Japanese material standard for hot dip galvanized steels. The commercial quality hot dip galvanized steel is a type of steel that can be made after galvanizing a coil of SPCC cold rolled material.

Cold Rolled Galvanized Sheet Metal Zinc Steel SGCC / …

Quality Galvanized Steel Coil manufacturers & exporter - buy Cold Rolled Galvanized Sheet Metal Zinc Steel SGCC / SGHC / SGC400 Grade from China manufacturer. FORTUNE BEST CORPORATION LIMITED We are looking for sole agent of oversea market!

Cold Rolled Hot DIP Galvanized Steel Coil for Roofing Sheet

Steel Coil, Gi Steel Coil, Steel Material manufacturer / supplier in China, offering Cold Rolled Hot DIP Galvanized Steel Coil for Roofing Sheet, 28 Gauge Cold Rolled Color Coated Corrugated Steel Roof Sheet, 30gauge Dx51d Prepainted Galvanised PPGI Steel Coil for Roof Tile and so on.

Galvanized Coils Sheets - Galvanized Coils, Galvanized ...

Vardhman Industries Ltd. offers a comprehensive range of galvanized coils, galvanized sheets, galvanized steel coils, hot dip galvanized coils, galvanized steel sheets, plain steel sheets, corrugated steel sheets and cold rolled steel coils, which have carved a niche in domestic as well as overseas market.

ZINCGRIP GI Steel | Hot Dip Galvanized Steel

Hot Dip Galvanized Steel. ZINCGRIP ® Steel is continuously coated on both sides with a zinc coating, using a hot dip process that we originally pioneered. With its tight metallurgical bond between the steel and the coating, ZINCGRIP Steel provides the strength and formability of steel plus the corrosion protection of zinc.

Hot-dip Galvanized Steel Sheets(GI) | Galvanized Steel ...

Hot-dip Galvanized Steel Sheets (GI) Hot-dip Galvanized Steel Sheets Hot-dip Galvanized Steel Sheets (GI) Hot-dip Galvanized Steel Sheets. Hot-dip galvanized steel sheets (GI) are produced by passing the full hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface.

Dana Steel – Manufacturer of Steel Coils , Steel sheets ...

As a Cold rolled Steel ( CR) manufacturer , we ensure CR Steel adheres to Quality Standards as laid by ASTM , JIS , DIN for coils and Sheets GALVANIZED STEEL COIL , SHEETS (G.I) Hot dipped galvanized steel is produced by passicaptureng cold rolled steel through a molten bath of Zinc at temperatures around 460 °C.

Galvanized steel sheets,Pre-painted galvanized steel coil ...

Thick 0.8mm 1mm 1.5mm cold rolled carbon steel coil/sheets/plate price ; SPCC Hot dipped Zinc Cold rolled Galvanized Steel coil dx51 ; Made in china PPG/HDG/GI/SPCC DX51 ZINC Cold rolled/Hot Dipped Galvanized Steel Coil/Sheet/Plate/Strip[PDF]

HOT DIP GALVANIZED - AK Steel

HOT DIP GALVANIZED STEEL, known as ZINCGRIP® Steel, is continuously coated on both sides with a zinc coating. The hot dip process, pioneered by AK Steel, provides a tight metallurgical bond between the steel and the coating. This process results in a material with the strength and formability of steel plus the corrosion protection of zinc.

Hot Dipped Galvanized Sheet/Plate (GI Sheet) – Jiang Lin ...

Jianglin is equipped with 3 production lines of galvanizing including one Zinc coating line and two Aluzinc production line. Yearly production is around 600,000 tons. Some of the cold rolled coils are sold to different factories. For thickness, we focus on 0.3-0.8mm. …

Hot Rolled Steel Sheet & Coil | Alliance Steel

alliancesteel.net› ProductsAlliance Steel’s hot rolled steel sheet & coil service capabilities include slitting, shearing, blanking, stretcher leveling, degreasing and brushing and metallurgical support. Hot rolled steel products will scale when in contact with oxygen and water vapor after the forming process.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.