Tel: +86-371-86151827

cut metal sheet plasma cutting table type

Steel grade:cut metal sheet plasma cutting table type

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

cut metal sheet plasma cutting table type Introduction

cut metal sheet plasma cutting table type

cut metal sheet plasma cutting table type: Used Sheet Metal Equipment for Sale | Sheet Metal … Applications Areas used in Metal Sheet Working Machinery TRUMPF sheet metal working /press brake from the TruBend Series 3000 In addition to the single purpose sheet metal equipment like a guillotine (plate) shears, used to cut sheet metal, there ...

Don't rule out plasma for cutting aluminum - The FABRICATOR

thefabricator› Article› Plasma CuttingPlasma cutting isn't new. But like any technology, it has its share of new developments. In any discussion about how to cut metal, it's right up there with laser and waterjet. The technology gets a bad rap, though, when the discussion turns to cutting aluminum. Plasma cutting has been around for ...

Using plasma arc cutting to clean-cut stainless steel ...

thefabricator› Article› Plasma CuttingPlasma Gases. Fabricators can process stainless steel with clean-cut surfaces by using nitrogen or a blend of oxygen and nitrogen as a plasma gas. These plasma gases provide a nonoxidizing plasma arc, which produces a clean-cut edge that is weld-ready without secondary operations.

How To Cut Metal - Laser - Plasma - Water Jet – Shearing

Plasma Cutting Sheet Metal A plasma cutter uses a hot jet of plasma to cut through electrically conductive materials such as steel, aluminum, brass, and copper at high speeds and with high precision. It works by creating an electrical channel of ionized gas (plasma) from the cutter through the workpiece in order to form a complete electrical ...

Metal Cutter, Metal Cutter Suppliers and Manufacturers at ...

JNLINK decorative plasma cut metal small metal cutter 1325 1530 4 axis cnc plasma cutting machine. 5 Jinan Link Manufacture & Trading Co., Ltd.

Plasma Cutter Tips and Techniques - Eastwood - MIG Welder

What Is ?

Plasma Cutting Metal Wall Art - DIY Pete

How to create this piece. 2. Draw a fish on a sheet of paper. (Roughly 10 inches wide) Next, cut out the fish and then place it on the smaller sheet of metal. Trace around the fish. Then slightly rotate the fish and trace around it two more times similar to how the fish are arranged below.

Plasma cutting - Wikipedia

Plasma cutting grew out of plasma welding in the 1960s, and emerged as a very productive way to cut sheet metal and plate in the 1980s. It had the advantages over traditional "metal against metal" cutting of producing no metal chips, giving accurate cuts, and producing a cleaner edge than oxy-fuel cutting .Process·

How To Cut Stainless Steel Sheet Metal With A Plasma Cutter

Will A Plasma Cutter Cut Stainless-Steel Considering the fact that one particular within the positive aspects making use of a plasma cutter will be the fact that you could cut stainless steel metal quickly and completely, it appears reasonable get started on your personal voyage directly into the realm of slicing by using stainless steel.

Using plasma arc cutting to clean-cut stainless steel ...

thefabricator› Article› Plasma CuttingTo clean-cut stainless steel sheet and plate, fabricators first must choose the right CNC cutting equipment and then set the correct process-related variables. Precise machine motion controls, torch-to-material distance control, and the correct plasma and assist gases all are crucial to producing weld-ready plasma-cut edges on all stainless steel thicknesses.

CNC Plasma Table Pricing - EZ Cut CNC

EZ Cut CNC Does Not Offer 4′ x 4′ CNC Plasma Tables. Air Plasma - Hypertherm Powermax 125 (125 Amps) Air Plasma - Hypertherm Powermax 105 (105 Amps) Air Plasma - Hypertherm Powermax 85 (85 Amps) Air Plasma - Hypertherm Powermax 65 (65 Amps) Air Plasma - Victor Thermal Dynamics Cutmaster A120 (120 Amps) Air Plasma - Victor Thermal Dynamics Cutmaster...

Laser Cutting vs. Plasma Cutting (2019 Updated ...

Laser Cutting V.S Plasma Cutting (2018) Laser cutting is mainly used to cut medium thin plate, and the cutting materials are in very wide range (metal, non-metal, ceramic, glass, etc.). Because the laser has the characteristics of high direction, high brightness and high intensity, the laser cutting speed is fast,...

Vicon Plasma Cutting Systems

Vicon offers the most versatile and best performing plasma cutting tables on the market. Simple to use, simple to customize, simply the best. Call us today for a quote - 1-800-563-8510

How to Plasma Cut, Weld, and Patina Metal Art - DIY Pete

How to Plasma Cut, Weld, and Patina Metal Art. I recently had the opportunity to work on a project with a high end audio video company out of Bozeman, Montana named Studio AV INC.They were looking for a heavy duty piece of art that included the company logo with an industrial yet modern feel.

CNC Plasma Tables for Sale | Plasma Cutter Tables ...

Easy-to-learn design software allows you to plot out a job on any computer in a few minutes. You can upload the pattern to the table with a USB drive. Welded steel frameworks support heavy pieces of material and won’t warp under heat. Our tables arrive pre …

Plasma Cutting Machine | eBay

Maximum Severance Cut Thickness . 60% @ 50A, 220V. 50 Amp digital Inverter Air plasma cutter. Compact plasma cutter has a handle for portability and use... Plasma Cutter 50 Amp Dual Voltage Cutting Machine Stainless Steel Metal PRO

CNC Plasma Cutting System | Hobby CNC Machine by GoTorch

Get the CNC plasma cutting machine from GoTorch. This hobby CNC machine is portable and easy to use. Order online and save. Only 95 and ready right out of the box.

CNC Plasma Cutter easily cuts artistic plasma cut pieces.

CNC Plasma Cutter helps cut custom artistic metal pieces quickly and easily. ... you can scan hand-drawn artwork or use computer files like clipart and cut them with your cnc plasma cutter easily. The PlasmaCAM system can automatically cut full 4x8 and 4x10 sheets through indexing. The software automatically performs raster to vector conversion ...

High accuracy Table type CNC plasma cutting machine cut ...

High Accuracy Table Type Cnc Plasma Cutting Machine Cut Metal Steel Tools Precision 0.1mm , Find Complete Details about High Accuracy Table Type Cnc Plasma Cutting Machine Cut Metal Steel Tools Precision 0.1mm,Cnc Plasma Metal Cutting Machine,Cnc Machine Cutting Tools,Cnc Cutting Machine For Steel from CNC Plasma Cutters Supplier or Manufacturer-Dalian J&Y Heavy Machine Co., Ltd.

Sheet Metal Cutting - custompartnet

Plasma cutting uses a focused stream of ionized gas, or plasma, to cut through sheet metal. The plasma flows at extremely high temperatures and high velocity and is directed toward the cutting location by a nozzle. When the plasma contacts the surface below, the metal melts into a molten state.

CNC Plasma Cutter, CNC Plasma Machines, Plasma Tables

The Hornet HD CNC plasma cutter is the most cost-effective plasma table on the market. The Hornet XD CNC plasma cutter combines strength and superior motion control to create a high performance plasma and/or oxy-fuel table. The ultra-fast Hornet HDX CNC plasma cutter sets the standard for acceleration, accuracy, and productivity in its class.

Plasma Tables: HD CNC Plasma Cutter Tables by Piranha

Piranha Plasma Tables: Standard and High Definition CNC Plasma Cutting. Piranha CNC plasma tables are affordable, and tough enough to handle anything you throw their way. Designed for top-notch cut quality, Piranha plasma tables are tough enough to run full production for years, yet nimble enough to cut intricate shapes with ease.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.