Tel: +86-371-86151827

stainless sheet 304l

Steel grade:stainless sheet 304l

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

stainless sheet 304l Introduction

304 / 304L Stainless Steel Sheet - T304 / T304L Sheet | O ...

onealsteel› Stainless Steel› Sheet304 / 304L Sheet Characteristics. 304 / 304L stainless steel sheet is used to manufacture stamped and machined parts for parts and products in corrosive and high heat applications. The stainless steel exhibits high corrosion resistance, high strength and temperature resistance. It can be become slightly magnetic when cold worked.

Type 304 and 304L Stainless Steel Explained - The Balance

Type 304L stainless steel is an extra-low carbon version of the 304 steel alloy. The lower carbon content in 304L minimizes deleterious or harmful carbide precipitation as a result of welding. 304L can, therefore, be used "as welded" in severe corrosion environments, and it eliminates the need for annealing.

304 Stainless and 304L Stainless Steel Sheet & Bar - AMS ...

304 / 304L stainless steel, also known as 18/8 stainless and often referred to as 302, is the most common stainless steel. 304 stainless steel contains a higher chromium and lower carbon content than other variations of type 302. It can be used in an "as welded" condition, while 302 must be annealed. AISI 304 is used in a variety of household and industrial applications.

304L Stainless Steel Sheet, Channel, Bars, Angle, and More!

304L Stainless Steel, 304 Stainless. Features. 304L has very good formability. Because of their low yield strength and high elongation this alloy can easily form and bend into complex shapes and figures. 304L, as well as 304, are the most common alloys in the stainless steel class. 304L stands up well in highly corrosive environments such as ...

304L Stainless Steel Sheet | Clinton Aluminum

The 304L #4 finish stainless steel sheet is a variation of chromium-nickel alloys. It has 18 percent chromium and 8 percent nickel. It has a low carbon content, which makes it safe for use in most welding construction operations.

What’s the Difference Between Grade 304 and 304L Stainless ...

So, if 304L is weaker than standard 304 stainless steel, why would anyone want to use it? The answer is that the 304L alloy’s lower carbon content helps minimize/eliminate carbide precipitation during the welding process. This allows 304L stainless steel to be used in the “as-welded” state, even in severe corrosive environments.

304/ 304L stainless steel sheet - deysteel

19 rows· 304/ 304L stainless steel sheet. Email: [email protected] 304 304L 304H belongs to … CSIMNSUS201≤0.15≤0.755.5-7.5SUS304≤0.08≤0.75≤2.00SUS304L≤0.03≤0.75≤2.00SUS304H0.04-1.0≤0.75≤2.00See all 19 rows on deysteel[PDF]

Stainless 302, 304, 304L, 305 - Specialty Stainless Steel ...

Minimum mechanical properties for annealed Types 302, 304, 304L, and 305 austenitic stainless steel plate, sheet and strip as required by ASTM specifications A 240 …

Stainless Steel ALLOY 304/304L – UNS S30400 / S304033 ...

Penn Stainless inventory now includes Alloy 304/304L (UNS S30400 / S30403), in sheet, sheet coil, plate, plate coil, round bar, processed flat bar and tubular products. Alloy 304/304L is ideally suited for home and commercial applications.

304/304L Stainless Steel Sheet - Slice of Stainless

304/304L Stainless Steel Sheet. 304/304L is a lower carbon alloy often used for applications requiring welding. Nicknamed 18-8 for its 18% chromium/8% nickel makeup. The most basic austenitic alloy. Shear Tolerances. 304/304L AMS 5513, 5511. Choose Your Material. Thickness

304/ 304L stainless steel sheet - deysteel

304/ 304L stainless steel sheet. Email: [email protected] 304 304L 304H belongs to austenitic stainless steel, it is the most widely used in the 300 series materials.[PDF]

Stainless 302, 304, 304L, 305 - Specialty Stainless Steel ...

Minimum mechanical properties for annealed Types 302, 304, 304L, and 305 austenitic stainless steel plate, sheet and strip as required by ASTM specifications A 240 …

304L Stainless Steel Alloy Data Sheet | CMC - Bellwood

UNS: S30403 EN-DIN: 1.4306. Printable PDF: 304L Stainless Steel Alloy Data sheet Industries supplied include: Process equipment in mining, chemical, cryogenic, food, dairy, and pharmaceutical industries. 304 grade stainless has excellent welding and formability characteristics and is one of the most utilized stainless steels. 304L is an extra low carbon grade with a 0.03% max carbon content ...

304L Austenitic Stainless Steel-Introduction, Applications ...

Known as ultra-low carbon stainless steel, grade 304L is widely used to make equipment and parts that require good overall performance (corrosion resistance and formability). 304L is a lower carbon variant of 304 stainless steel, suitable for applications requiring welding.

304L Stainless Steel Pipe | Clinton Aluminum

304L resists heat well. It shows to have greater carbide precipitation resistance compared to 304 alloys, allowing it to be serviced continuously at temperatures between 800 and 1580 degrees F. 304L stainless steel pipes are austenitic, making it an ideal choice for forming moving parts.

Stainless Sheet - Ryerson

Stainless Steel Sheet Ryerson stocks many varieties of stainless steel sheet including 304, the most popular of the stainless steels. This type of stainless sheet thickness provides excellent corrosion resistance for both industrial and marine applications.

ASTM A240 Type 304 Stainless Steel Sheet and Plate suppliers

The Vickers Hardness of 304L stainless steel is 159. 304L stainless steel has a Charpy Impact of 216 J (159 ft-lb). The Magnetic Permeability of 304L stainless steel is 1.008. ASTM A240 grade 304l sheets types. 304L stainless steel is in very big demand as it can be used in severely corrosive conditions.[PDF]

MATERIAL SAFETY DATA SHEET Stainless Steel (301, …

MATERIAL SAFETY DATA SHEET Zapp – Stainless Steel (301, 302, 304, 304L, 305, 309, 310, 310S, 316, 316L, 321, 347, 350, 430, 17-7PH, 18SR) Version Date: January 25, 2011 Page 3 of 8 4. FIRST - AID MEASURES First Aid – Skin Seek medical help for serious cuts or lacerations or if irritation from contact with dusts persists.[PDF]

STAINLESS STEEL - AK Steel Holding

formation of ferrite in the weld deposit. Type 304 and 304L are generally considered to be the most common alloys of this stainless class. When a weld filler is needed, AWS E/ER 308, 308L or 347 are most often specified. Types 304 and 304L Stainless Steels are well known in reference literature and more information can be obtained in

Home [krdtsteel]

304/ 304L/ 304H stainless sheet 2B finish ss sheet. About 304/304L/304H stainless steel. 304 304L 304H belongs to austenitic stainless steel, it is the most widely used in the 300 series materials. On the whole, the 304 304L 304H has very similar characteristics, the only difference lies in the level of carbon content, so there will be a little ...

304 / 304L - Rolled Alloys, Inc.

304 / 304l 304 is the original "18-8" stainless. It is produced in greater quantity than any other austenitic stainless steel. 304 provides useful resistance to corrosion in many environments ranging from moderately reducing to moderately oxidizing.

304 Stainless Steel Plate | Midwest Steel & Aluminum

304 Stainless Steel Plate. 304 Stainless Plate, the most widely used of the stainless and heat resisting steels. 304 stainless plate offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments Typical specifications for 304 Plate and 304L Stainless Steel Plate are ASTM A-240, ASME SA -240 and A666.

Speedy Metals - Stainless Steel Sheet - 304 - #2 Finish

Stainless Steel Sheet 304 #2 Finish. Typical Applications. 304/304L is used almost exclusively for parts requiring machining, welding, grinding, or polishing where good corrosion resistance is also required. It is a good general all-purpose stainless grade. Good in corrosive environments as in paper and chemical industries and cryogenic services.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.