Tel: +86-371-86151827

s355j2 rör plate

Steel grade:s355j2 rör plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s355j2 rör plate Introduction

Beverly Steel - S355J2+N Steel Plate

S355J2+N Steel Plate. EN 10025 S355J2+N HIGH TENSILE STRENGTH STRUCTURAL STEEL PLATES S355J2+N and S355J2G3 are the same steel grades as both grades delivery condition are normalized. G3 and N stand for normalized.

High Strength Low EN 10025 S355J2+N Steel Plate Supplier ...

EN 10025 S355J2+N Plates Manufacturer. Marc Steel is a recognized manufacturer and trader of EN 10025 S355J2+N Plates, which is factory-made by our skillful specialists by using finest in class raw material. EN 10025 S355J2+N Plates Besides this, our experts offer this High Tensile EN 10025 S355J2+N Plates at most equitable rate

S355 S355J2 S355J2+N Steel - UK Supplier

West Yorkshire Steel are S355 stockholders and suppliers of flame cut plate, round bar and flat bar. This steel grade can be supplied to your required sizes as one offs or multiple cut pieces. Flame cut plates can also be Lumsden ground to size on thickness. Contact our experienced sales team who will assist you with your S355 carbon steel enquiry.

S355J2+N| S355J2+N Steel Plates| 355J2+N Structural Steel ...

Ready Stock Inventory of Structural Steel Plates to EN10025-2 S355J2 +N in with EN10204 .Prosaic Steel is a Leading Supplier of S355j2+ N based in India Ex-Stock High specification S355J2+N steel plates. 3mm to 200mm Thickness upto 12 Meters Long, Distributor of S355 J2 N Plates …[PDF]

S355 S355J2 S355J2+N Steel - West Yorkshire Steel

West Yorkshire Steel are suppliers of S355 grades in steel plate, round bar and flat bar. As an unalloyed low carbon steel grade S355 is supplied in the hot rolled and cold drawn conditions. The S355 steel specifications are high yield non alloy steels.

S355 J2+N Steel Plate - Co., Ltd. - htsteelmill

The difference is that the 3.2 plates have been independently verified by a third party inspector, usually Lloyds Register or DNV, whilst the 3.1 plates have been certified by the mill based on their ISO 9001:2010 quality system. S355J2+N and S355J2G3 are the same steel grades as both grades delivery condition are normalized.

DIN S355J2 - Basedo Steel

DIN S355J2. Material Material Category Description Standards ; 1.0570: Non-alloy structural steel: Non-alloy structural steel. more: DIN S355J2G3, ...

S355j2 steel plate Manufacturers & Suppliers, China s355j2 ...

s355j2 steel plate manufacturer/supplier, China s355j2 steel plate manufacturer & factory list, find qualified Chinese s355j2 steel plate manufacturers, suppliers, factories, exporters & wholesalers quickly on Made-in-China.

s355j2-steel-plate - Unitedsteel Stainless Factory

Unitedsteel Stainless Factory; Unitedsteel Plate Factory are specialized in producing and exporting S355J2, S355K2, S355K2 and So on. Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Which is a large steel plate supplier mill. Our stock warehouse had about 30000tons S355J2, S355JR, S355K2, S355K4Low alloy steel plates.

Which steel grade is best equivalent to S355J2+N ?--Xin ...

Which steel grade is best equivalent to S355J2+N ? Source:Xin Steel Industry Date:2015/10/22 S355J2+N steel is one grade in EN10025-2 with low alloy.S355J2+N (minimum yield strength 355 MPa, Tensile 470 to 630 MPa,+N means plus Normalized when rolling,J2 means doing charpy V-notch impacting test @ -20 ℃).

S355 J2+N Steel Plate - Co., Ltd. - htsteelmill

The difference is that the 3.2 plates have been independently verified by a third party inspector, usually Lloyds Register or DNV, whilst the 3.1 plates have been certified by the mill based on their ISO 9001:2010 quality system. S355J2+N and S355J2G3 are the same steel grades as both grades delivery condition are normalized.

S355J2,S355J2 STEEL,S355J2 PLATE - Mild steel plate ...

Low alloy steel plate S355J2 under European steel standard EN 10025-2 which is hot rolled steel product of structural steels.For delivery of S355J2,low temperature impacting test shall be done under temperature minus 20 centigree.For the heavy steel plates S355J2 thickness above 40mm,Xinsteel suggest our end customers accepting Normalized heat treatment replacement of As rolled.Besides ...

S355J2+N Plates Manufacturers & Suppliers | Rapid Delivery ...

S355J2+N Plates. Since 1998, Om tubes and fittings have represented quality, trust and reliance. We believe key to success is in innovation. Om tubes and fittings are specialized manufacturers, dealers of premier quality S355J2+N Plates.We are an innovation …

EN 10025 S355J2 N, EN10025 S355J2+N Steel Plates Stockist

EN 10025 S355 J2+N Steel Grade Plate, S355J2 N Structural Steel Plates Suppliers, EN 10025 S355J2+N High Tensile Steel Plates Stockists, EN10025 S355J2 N Low Alloy Steel Plates in Vadodara, S355J2 N Carbon steel Plate in Gujarat, India. Know all about EN 10025 S355J2 N plates . Do you know about EN 10025 S355J2 N plates? If not, then this ...

EN S355N Specs - MS Plates - napmr.org

Castings and tubes replaced by/ Gjutgods och rör ersatt av SS-EN 10 083-1 - 25 CrMo 4 (1.7218) ... Gangsteel is specialized in supplying EN10025-2 steel plate in S355J2. EN 10025-2 S450J. Gangsteel is specialized in supplying EN 10025-2 steel plate in S450J0. EN10025-3 S355N Carbon and Low-alloy High-strength Steel Plate.

Forging s420mc 1 0980 - A36 steel stock Forging Low …

Hot sell 16Mo3 steel chemical composition ,BBN keeps more than 10,000 tons 16Mo3 steel chemical composition in stock each month.We can meet our customer's any quantity request.Based on these stock source, our advantage industry spread into steel process like:cutting ( any size and any shape ) drilling,welding,milling,machining and steel structure.if you want to know more,don't miss.

S235JRH EN 10219 Carbon Steel Seamless Pipes and Tubes ...

S235JRH EN 10219 Carbon Steel Pipes Manufacturer. Marc Steel is a well-known manufacturer of Carbon Steel EN 10219 S235JRH Pipes, which are factory-made from superior grade of quality material.With respect to all of this we have a vast patron base of Carbon Steel EN 10219 S235JRH Tubing all over the market.Moreover, we are trustworthy and dependable manufacturers who make …

S355J2 W+N Sheet, Plate Supplier in Mumbai, India

S355J2 W+N Sheet/plates are the common yet high strength steel that is mainly used for construction. It is a non-alloy and structural steel with increased yield strength of up to S335 MPA. It is a non-alloy and structural steel with increased yield strength of up to S335 MPA.

China s355j2h en 10219 hup ,A36,A36 steel plate,mild steel ...

S355J0W is a kind of low alloy steel under EN10025 standard. The impact test temperature is 0 ℃. S355J0W steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to …

analys st52 3N - Mild Cold Rolled steel plate

China SA203 spec,A36,A36 steel plate,mild steel plate . SA516 Grade 70N Plates A516 Gr.70N Plates We are Stockholder & Distributors of Boiler Quality, Pressure Vessel, High Tensile Steel Plates in Grades S355J2G3, S355J2G3+N, ST52-3, ST52-3N, S355J2H, S355J2+N, ST52.0, E355, …

s355j2 carbon steel plates - alibaba

Alibaba offers 316 s355j2 carbon steel plates products. About 96% of these are steel sheets, 1% are stainless steel sheets. A wide variety of s355j2 carbon steel plates options are available to you, such as aisi, astm, and gb.

S355G1 N steel for Tehuacan - pressure-vessel-steel

Home > pressure vessel>S355G1 N steel for Tehuacan. Product Categories. Carbon Steel. corten steel welding pdf. jis g 3101 ss400. s460n material. qste 340 steel. s335j2g3 steel us equivalent. ... normalizing plate purpose for To. en 10025 s275jr for Aosta. specification of …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.