Tel: +86-371-86151827

wear resistant steel plate nm 500

Steel grade:wear resistant steel plate nm 500

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

wear resistant steel plate nm 500 Introduction

NM 500,NM 500 STEEL PLATE__Steel Supplier

Wear Resistance Steel Plate NM 500,NM 500 STEEL PLATE . NM500 is an abrasion resistant plate with a hardness of 500 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. NM500 offers very good weldability.

NM 450 Wear resistant steel plate - hopkinsplasticsurgery

Any request for NM 450 Wear resistant steel plate Email:[email protected] and Whaisapp:0086-130-83697781. Related Products carbon steel sheet stamping blanks

Supply NM 400 steel plate in 400,450,500,600

The series of NM wear-resistant steel combined the properties including high strength, high hardness, high wear resistant, weldable, bendable and mainly applied in:. Edge of loaders in loader industry; Wear-resistant lining plate in crusher industry. Slat type conveyer in colliery mechanical industry.

NM500 Wear Resistant Steel in large stock,high-quality ...

NM500 is a high-strength wear-resistant steel, which has a high wear resistance, Brinell hardness value reaches 500 (HBW) mainly in the need to wear the occasion or location to provide protection to the equipment longer life, reduced maintenance brought maintenance and downtime, and the corresponding reduction of capital investments.

Wear resistant steel plate AR360, AR400, AR500, NM360 ...

Jin Chao Yang can supply Wear resistant steel plate AR360, AR400, AR500, NM360, NM400, NM500 with Executive Standard:JIS G4051, GB711, YB/T107, ASTM, welcome to inquiry

NM500 steel plate,NM500 Wear Resistant Steel - steel-jw

NM500 is a high-strength wear-resistant steel, which has a high resistance to abrasion, Brinell hardness value reaches 500 (HBW) is to provide the required protection to wear the occasion or parts of the device for longer life, reduced maintenance brought maintenance and downtime, and the corresponding reduction in capital investment.

NM400,NM 400 STEEL PLATE__Steel Supplier

Wear Resistance Steel Plate NM400,NM 400 STEEL PLATE ... Gangsteel is specialized in supplying NM 400 steel plate in 400. For more information of NM 400 steel plates, please check them in following: ... Gangsteel is specialized in supplying NM 600 steel plate in 600,400,450,500 steel plate. NM 500,NM 500 STEEL PLATE.

Hardox® wear plate- Wear and abrasion resistant steel - SSAB

With Hardox® wear plate, you can design structures that are wear-resistant, strong and lightweight, all at the same time. Today, Hardox® has come a long way from its early years. It comes in a much wider range, and the traditional Hardox® wear plate is also available as wear-resistant tubes and round bars. A die-hard steel for long-living ...

Abrasion Resistant Steel Plate | Leeco Steel, LLC

leecosteel› Steel Plate ProductsAbrasion Resistant steel plate is typically made in the as-rolled condition. and have been developed specifically for long service life in harsh conditions. AR steel plate is typically made in the as-rolled condition. We offer various thicknesses, lengths, and widths of abrasion resistant steel plate to meet your specifications. Request a quote today!

NM500 steel plate,NM500 Wear Resistant Steel - steel …

NM500 is a high-strength wear-resistant steel, which has a high resistance to abrasion, Brinell hardness value reaches 500 (HBW) is to provide the required protection to wear the occasion or parts of the device for longer life, reduced maintenance brought maintenance and downtime, and the corresponding reduction in capital investment.

GNEE STEEL | …

GNEE STEEL supply NM360,NM400,NM450,NM500,NM550,HARDOX400,HARDOX450, HARDOX500,HARDOX550, HARDOX600,Wear resistant steel plate,abrasion-resistant steel,steel plate

Abrasion resistant nm400 nm500 steel plate

Wear Resistance Steel Plate NM 500,NM 500 STEEL PLATE NM500 is an abrasion resistant plate with a hardness of 500 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. Learn more.

high strength hardfacing hot rolled nm450nm500 resistant ...

High Strength Hardfacing Hot Rolled Nm450nm500 Resistant Wear Plate For Sale , Find Complete Details about High Strength Hardfacing Hot Rolled Nm450nm500 Resistant Wear Plate For Sale,Resistant Wear Plates,Nm450 Nm500steel Plate For Sale,Wear Steel Plate from Steel Sheets Supplier or Manufacturer-Shandong Jingen International Trading Co., Ltd.

A1 Alloys :: A1 Hardcore 400, 450, & 500 Wear Plate

A1 Hardcore 400, 450, & 500 Wear Plate. A-1 Alloys HardCore Wear Plate. HardCore AR500 is an abrasion resistant steel plate that offers outstanding wear and impact resistance along with fatigue and corrosion resistance. A-1 Alloys provides consistent, controlled quality so our HardCore AR steel plates perform consistently with no surprises ...

NM400,NM 400 STEEL PLATE__Steel Supplier

Wear Resistance Steel Plate NM400,NM 400 STEEL PLATE ... Gangsteel is specialized in supplying NM 400 steel plate in 400. For more information of NM 400 steel plates, please check them in following: ... Gangsteel is specialized in supplying NM 600 steel plate in 600,400,450,500 steel plate. NM 500,NM 500 STEEL PLATE.

Hardox wear plate- Wear and abrasion resistant steel - SSAB

Hardox® wear-resistant steel helps to reduce weight and extend the service life of truck bodies, containers, dumpers, buckets, garbage trucks and more. Originally intended as wear plate, it turns out that Hardox® steel can act as a load-carrying part in many applications due to its unique combination of hardness and toughness.

AR400 & AR500 Wear Plate & Bar | Specialty Steel Co.

AR500 is a “thru-hardened”, abrasion resistant, alloy wear plate. Hardness range is 470/540 BHN with a nominal hardness of 500 BHN. This plate product is intended for use in applications where a good balance of impact, toughness and abrasion resistance are required.

AR 400/500-Highly Abrasive Environments - Alloy steel

aasteel› …› Mining (Abrasion Resistant Applications)These grades are used in highly abrasive environments within the mining, cement, aggregate, and various ground engaging applications. Both our Ameriwear 400 and Amerihard 500 have additional alloying elements which increase formability and enhance weldability. Download Abrasion Resistant Wear Plates PDF (139 KB) Specifications

Hardox 450 - The most popular structural wear plate - SSAB

Hardox® 450 is an abrasion-resistant steel with a nominal hardness of 450 HBW. Hardox® 450 combines good bendability and weldability with an option for guaranteed impact toughness (Hardox® 450 Tuf). The products can be used in many different components and structures that are subject to wear.

Wear Resistant Plate - jiaborui888

XAR400 450 500 600 Wear Resistant Plate view more. WEL-HARD 500 Wear Resistant Plate view more. WEL-HARD 400 Wear Resistant Plate view more. EH400 Wear Resistant Plate view more. Related News. ... stainless steel wires. Wear Resistant Plate. New product. stainless steel checkered plates. Message;

Products – Specialty Wear Resistant Steel Products | Tricon

plate products. Tri-Braze™ Tri-Braze Dura-Plus™ Super-C™ Duracorr™ Tricon 400F | Tricon 500F™ Bar Products. Specialty Treated Pins™ Triloy™ Prime-Arc™ welding consumables. Prime-Arc™ Prime-Arc Super-C™ Prime-Arc 11™ Prime-Arc 300™ Prime-Arc 400™ Prime-Arc MWC™ Prime-Arc 22™ Prime-Arc 3™ Prime-Arc 85 ...

SAS Global SA500 Alloy Wear Plate

SA500 is a heat treated, quench and tempered to spec, modified 8630 steel. SA500 is a versatile 500 HB wear resistant steel. It is available in a range of sizes and hardness. SA500 is a steel with high tensile strength and fatigue resistance, while maintaining good toughness qualities.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.