Tel: +86-371-86151827

low temperature steel plate 13mnni6 to 3

Steel grade:low temperature steel plate 13mnni6 to 3

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

low temperature steel plate 13mnni6 to 3 Introduction

13MnNi6-3 steel

This page provides 13MnNi6-3 datasheet, 13MnNi6-3 mechanical properties, chemical element 13MnNi6-3, technical specifications of 13MnNi6-3 steel material properties. 13MnNi6-3 …

DIN 13MnNi6-3 datasheet,DIN 13MnNi6-3 chemical,DIN …

DIN 13MnNi6-3 datasheet, DIN 13MnNi6-3 mechanical properties, chemical element DIN 13MnNi6-3, technical specifications of DIN 13MnNi6-3 steel material properties. DIN 13MnNi6-3 …

13mnni6 3 steel - w3s.in

Introduction low-temperature structural steel (13MnNi6-3) The total content of the alloy elements is 5% ~ 10%, and the microstructure depends on the heat treatment system. 9Ni steel is a typical steel type.

EN10028-4 13MnNi6-3 Low Temperature Pressure Vessel …

Home > Products > Pressure vessel steel > Low temperature container plat > EN10028-4 13MnNi6-3 Low Temperature Pressure Vessel Plate EN10028-4 13MnNi6-3 Pressure Vessel Plate have the Characteristic of Higher strength, toughness. 13MnNi6-3 Pressure Vessel Plate is widely used in the manufacture of bridges, boilers, ships and other large structures.

13mnni6 3 steel - onlineshoppingsitesinindia.co.in

13MnNi6-3 - steel-gradesFree cutting steel: in steel join a certain number of one or more than one type of sulphur, phosphorus, lead, calcium, selenium, tellurium and cutting elements to improve its cutting sex of alloy. Also called the automatic machine processing steel, hereinafter referred to as automatic steel.

13mnni6 3 - pressure vessel steel plate grades

13mnni6 3, steel,Hot sell 13mnni6 3, pressure vessel steel plate grades stock in China,China 13mnni6 3, pressure vessel steel plate grades factory. Keeps more than 10,000 tons hot rolled and cold rolled 13mnni6 3, pressure vessel steel plate grades in stock each month. We can meet our customer's any quantity request.[PDF]

Datasheet for Steel Grades Alloy Steel 13MnNi6-3

This page is mainly introduced the 13MnNi6-3 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 13MnNi6-3,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Steels for cryogenic service | Industeel

The CryElso ® family includes a complete range of cryogenic steel grades from 0.5%Ni to 36%Ni steels, designed for the storage and transport of gases from propane to LNG.. Industeel’s CryElso ® range offers the best balance between strength, toughness and weldability for these low-temperature applications, with special attention paid to crack arrest properties thanks to a special ...

13MnNi6-3 - China Super Duplex Stainless Steel Flanges ...

13MnNi6-3 angle bars, 13MnNi6-3 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control 13MnNi6-3 chemical composition and 13MnNi6-3 mechanical properties.

Low Temperature Pressure Vessel Steel Plates, Low ...

Alibaba offers 58 low temperature pressure vessel steel plates products. About 82% of these are steel sheets, 1% are stainless steel sheets. A wide variety of low temperature pressure vessel steel plates options are available to you, such as astm, aisi, and jis.

Q&A : What is the difference between LTCS and Carbon steel?

SA-203 Steel Plate Grades A, B, D, E and F Nickle Alloy Steel Plates. For low temperatures (-150 deg F) Low Temperature Carbon Steel Tubes ASTM A334 Gr.1 ASTM A333——Seamless and Welded Steel Pipe for Low-Temperature Service: Mainly Grade: Grade 1, Grade 3, Grade 4, Grade 6, Grade 7, Grade 8, Grade 9, Grade 10, Grade 11

Low Temperature Steel Plate Wholesale, Temperature Steel ...

Alibaba offers 2,750 low temperature steel plate products. About 21% of these are steel sheets, 2% are stainless steel sheets. A wide variety of low temperature steel plate options are available to you, such as plate, coil.

Q&A : What is the difference between LTCS and Carbon steel?

*Low-temperature carbon steels have been developed chiefly for use in low-temperature equipment and especially for welded pressure vessels. They are low- to medium-carbon (0.20 to 0.30%), high-manganese (0.70 to 1.60%), silicon (0.15 to 0.60%) steels, which have a fine-grain structure with uniform carbide dispersion.

11mnni5 3 steel plate - hopkinsplasticsurgery

If you have any requirement in steel plate for EN10297-1 11MnNi5-3, 13MnNi6-3, 12Ni14, X12Ni5, X10Ni9, whether the new plate or stock list of material, please feel free to contact us by email of calling.

13MnNi6-3 Nickel alloy steel for Pressure Vessel steel ...

13MnNi6-3 Nickel alloy steel for Pressure Vessel steel plate purpose, US $ 500 - 1,200 / Metric Ton, EN10028-4:2003, 13MnNi6-3 steel plate, 5-150MM.Source from Henan Longpeng Marine Metal Materials Co., Ltd. on Alibaba.

carbon steel sheet - mielemetal

Miele Steel Co., Ltd., founded in 1998 is a professional manufacturer and global exporter specializing in metal manufacture and exportation.[PDF]

RESEARCH ON THE LOW TEMPERATURE PRESSURE …

Abstract. C-Mn and 0.5Ni low temperature steel has been produced by the technology of low phosphorus and low sulfur with the equipment upgrading and technological innovation. By the technology of ultra-low phosphorus and sulfur, 3.5Ni, 5Ni and 9Ni low temperature …

nickel steel plate 11mnni5 3 - w3s.in

For Nickel alloy steels with specified low temperature properties, we provide 11MnNi5-3,13MnNi6-3,15NiMn6,12Ni14,X12Ni5,X8Ni9,X7Ni9 Steel Sheet according to STD of …[PDF]

DETERMINATION OF THE RESTART TEMPERATURE …

DETERMINATION OF THE RESTART TEMPERATURE FOR NORMALIZED ROLLING OF C-MN STEEL IN PLATE MILL MSc.Еng 3Ratko Ilievski1, PhD Assoc. Prof. MSc Zlatanka Martinova2, MSc Eng Bobi Krstevski1 PhD Prof. MSc Jon Magdeski A.D. Makstil, 1000 Skopje, Republic of Macedonia1,UCTM, Sofia, Bulgaria2, Faculty of Technology and Metallurgy, 1000 Skopje, Republic of Macedonia

Steels for Cryogenic and Low-Temperature Service :: Total ...

Steels for Cryogenic and Low-Temperature Service. Other alloy steels are suitable for service in the low-temperature range. The steels A201 and T-1 can suffice to -45°C, nickel steels with 2.25% Ni can suffice to -59°C, and nickel steels with 3.5% Ni to -101°C.

Steel Plate Grades - Continental Steel & Tube Company

LOW CARBON PLATE STEEL. Low Carbon Plate Steel is manufactured to three separate carbon ranges that relate to thickness and end use requirements. Plates 3/4″ and lighter are produced to the lowest carbon range (0.10-0.20) for maximum cold forming and welding properties.

How Low Temperature Affects Steel (A106-B) Piping - …

Low Temperature Steel Pipe Calculations. As stated in a previous post on cold temperature and equipment, low temperatures have an undesirable affect on ductile steels, making them more brittle and prone to failure.This is a problem in process piping, especially in Canada, with a large range of temperatures in the summer and winter seasons.

Steel Plates - Russel Metals

ASTM A 285. Specification for Low and Intermediate. Tensile Strength Carbon Steel Plates for Pressure Vessels. ASTM A 285 covers three grades of low and intermediate tensile strength carbon steel plates intended for fusion-welded pressure vessels up to a maximum of 2" thick.[PDF]

Development of Shipbuilding Steel Plate with Superior …

Development of Shipbuilding Steel Plate with Superior Low Temperature Toughness for Large Heat Input Welding C-enriched phase in the softened HAZ has undergone pearlite decomposition, whereas, in the developed steel, it has become MA, contributing to an increase in the

Low Temperature Carbon Steel Pipe - A333 Grade 6 Pipe ...

worldwidepipe› Products› Pipe› SeamlessLow Temp Seamless Carbon Steel Pipe Worldwide Pipe & Supply stocks and supplies Seamless A/SA333 Grade 1/6 Pipe for your Low Temperature Service applications. It covers seamless and welded steel pipe for use at cold temperature service up to minus 50° F (minus 45° C).

Performance of Steel and Equipment in Low Temperatures ...

Designing and Manufacturing Equipment For Low Temperatures. This is a follow up post to the Effects of Low Temperature on Performance of Steel and Equipment. The initial article covered the background theory on low temperature steel and now I would like to review a bit more about how it affects design and manufacturing.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.