Tel: +86-371-86151827

sb450m steel plate application

Steel grade:sb450m steel plate application

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sb450m steel plate application Introduction

Boiler plate steel grade alloy SB450M JIS G3103 specification

Steel Name:SB450M Boiler steel plate,SB450M Pressure vessel steel plate Steel Grade:SB450M Steel Standard: JIS G3103 Thickness:6mm-450mm Width:1200mm-4200mm Length:3000mm-18000mm Surface Treatment:Shot blasting and painting or coated Main application of JIS G3103 SB450M are used to build boilers and pressure vessels such as petroleum, chemical ...

SB450M steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. SB450M can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

SB410, SB450, SB480, SB450M, SB480M, JIS G3103, Steel ...

Applicationt: Acura . Production Description: Sell SB410, SB450, SB480, SB450M, SB480M, JIS G3103, steel plate 1. JIS G3103-07 steel specification is for Carbon steel and Molybdenum of boilers and other pressure vessel steel grade in SB 410, SB 450,SB 480, SB 450M and SB 480M

JIS G3103 Carbon&Alloy Steel Plate for Boiler - ANSON STEEL

Product Scope: JIS G3103 standard includes steel grades: SB410, SB450, SB480, SB450M and SB480M. It specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used for boilers and pressure vessels, excepting those to be used at room and low temperatures.

SB450M steel plate,SB450M steel sheet - JOIN WIN STEEL

Delivery Status : Hot rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technology, etc. JIS G3103 SB450M carbon steel for pressure vessel application : SB450M steel plate is widely used in petroleum, chemical, power plants, boilers, the production reactor, heat exchangers, separators, spherical tanks, oil and gas cylinders, liquefied gas tanks, nuclear reactor pressure ...

JIS_SA204 steel plate

SB450M Steel plate for Boiler Pressure Vessel ; SB450M steel plates is a kind of material for boiler and pressure vessel steel.JIS3103SB450 steel plates is characterized by minimum yield strength of 255 MPa and by good weldability,SB450M steel plate is mainly used to for manufacturing boilers

G3103,JIS G3103 boiler Steel plate - JOIN WIN STEEL

the steel grades of JIS G3103 Steel for boiler using are SB410, SB450, SB480, SB450M, S480M.JIS G3103 SB410, SB450, SB480, SB450M, S480M application is to fabricate boilers

Carbon Steel and Molybdenum Alloy Steel Plates for Boilers ...

JFS Steel has been offering customers special steel materials such as CNS-SB450M Carbon Steel and Molybdenum Alloy Steel Plates for Boilers and OtherPressureVessels and precision steel machining services since 2006. With both highly skilled technology and 47 years of experience, JFS Steel always makes sure to meet each customer's demands.[PDF]

HOT ROLLED COIL & STEEL PLATE - Taweechoke Panich …

HOT ROLLED COIL & STEEL PLATE STANDARD & APPLICATION No. Classification JIS ASTM EN TIS GB 1 Rolled Steel Plates ... SB450M, SB480M DIN 17155 H11 SEW089Wst E36, E39 E47, E51 DIN 17135 Ast 35 4 Steel Plates for Shipbuilding and Hull Structural NK (NIPPON KAIGI KYOKA) KA, KB, KD, KE, KA32, KA36, KD36,

SB480M steel plate application - pressure vessel steel ...

Application: High-strength Steel Plate, pressure vessel plate, boiler steel plate; SB450M and SB480M. It specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used for boilers and pressure vessels, excepting those to be used at room and low temperatures.

sb450m steel - carbon-steeltube

SB450M steel plates is a kind of material for boiler and pressure vessel steel.JIS3103SB450 steel plates is characterized by minimum yield strength of 255 MPa and by good weldability,SB450M steel plate is mainly used to for manufacturing boilers. JIS G3103 SB450M steel work/steel structure/steel ...

JIS G3115 SPV450 steel plate application - pressure vessel ...

Product Id 236964. SPV315 Heat Exchanger Steel Plate Main Application: JIS G3115 SPV355 Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project. Steel Standard: JIS . cheap SG365 steel plates application-BBN STEEL sale steel

SB450M Steel plate for Boiler Pressure Vessel - SA204steel

SB450M steel plates is a kind of material for boiler and pressure vessel steel.JIS3103SB450 steel plates is characterized by minimum yield strength of 255 MPa and by good weldability,SB450M steel plate is mainly used to for manufacturing boilers

JIS G3103 SB450M|SB450M|SB 450M STEEL PLATE__Steel …

JIS G3103 Steel Plate JIS G3103 SB450M|SB450M|SB 450M STEEL PLATE. JIS G3103 specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used for boilers and pressure vessels, excepting those to be used at room and cold temperatures. This standard covers steel SB410, SB450, SB480, SB450M and SB480M.These plates are ...

JIS G3103 SB410,SB450,SB480,SB450M,SB480M Steel Plate ...

China United iron and steel Ltd specialized in manufacture steel plates JIS G3103 SB410,SB450,SB480,SB450M,SB480M steel plate carbon steel plate. JIS G3103 specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used...

JIS SB480M steel in shanxi mild steel plate,structure ...

HOT ROLLED COIL & STEEL PLATE STANDARD & APPLICATION No. Classification JIS ASTM EN TIS GB 1 Rolled Steel Plates for Structural Use JIS G 3101 SS330, SS400, SS490, SS540 JIS G 3106 SM400A, B, C SM490A, B, C SM490YA SM490YB SB480M DIN 17155 H11 SEW089Wst E36, E39 E47, E51 DIN 17135 Ast 35 4 Steel Plates for ... JIS G3103 SB410,SB450,SB480,SB450M ...

SB480M Boiler and Pressure Vessel Steel in Kyrgyzstan

SB480M steel plate,SB480M steel sheet . JIS G3103 SB480M carbon steel for pressure vessel application SB480M steel plate is widely used in petroleum, chemical, power plants, boilers, the production reactor, heat exchangers, separators, spherical tanks, oil and gas cylinders, liquefied gas tanks, nuclear reactor pressure shell.[PDF]

MATERIAL COMPARISON TABLE - Carbon Steel | Alloy …

MATERIAL COMPARISON TABLE . ASTM STANDARD UNS NO. KS/JIS Symbol KS/JIS Number Remark DIN Type DIN Material Remark ... Grade A K11820 SB450M/SB450M D3560/G3103 - 16Mo 5 - 1.5423 Order with DIN 50049-3.1C(3a) ... Steel Plate and Sheet for Pressure Vessels Type 304 S30400 STS304/SUS304 D3693/G3601 - X5CrNi 18 9 17440 1.4301 (3b) ...[PDF]

Application for an Antique Motor Vehicle Plate or Year …

Application for an Antique Motor Vehicle Plate or Year of Manufacture Registration Plate . Customer Information . ... X Plates issued in 1916 - 1919, were FLAT steel, had no embossed numbers, and no raised border X If no plate was issued in a particular year, a plate from the previous year can be[PDF]

HOT ROLLED COIL & STEEL PLATE - Taweechoke …

HOT ROLLED COIL & STEEL PLATE STANDARD & APPLICATION No. Classification JIS ASTM EN TIS GB 1 Rolled Steel Plates ... SB450M, SB480M DIN 17155 H11 SEW089Wst E36, E39 E47, E51 DIN 17135 Ast 35 4 Steel Plates for Shipbuilding and Hull Structural NK (NIPPON KAIGI KYOKA) KA, KB, KD, KE, KA32, KA36, KD36,

The Five Sectors for Steel Applications

Steel is both the most widely used and most recycled metal material on earth. From stainless and high-temperature steels to flat carbon products, steel in its various forms and alloys offer different properties to meet a wide range of applications.[PDF]

APPLICATION OF HIGHER-STRENGTH HULL …

Steel plates well in excess of 51 mm* are commonly found in large container carriers. More recently, one technical innovation that is having a significant impact on the next generation of container carriers is the application of hull structural thick steel plates with a minimum yield stress of 460 N/mm. 2 (H47). In addition to the ABS.

K-TEN610CF: quenched and tempered 610 N/mm 2 class …

Steel Plates. K-TEN610CF: quenched and tempered 610 N/mm 2 class high-strength steel plate for welded structures with low crack susceptibility (Crack-Free Steel); K-TEN780CF: quenched and tempered 780 N/mm 2 class high-strength steel plate for welded structures with low crack susceptibility (Crack-Free Steel); Low carbon SB450, SB450M steel plates with excellent weldability

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.