Tel: +86-371-86151827

astm a203 grade e steel sheet

Steel grade:astm a203 grade e steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a203 grade e steel sheet Introduction

ASTM A203 Grade E alloy steel for pressure vessels - JOIN ...

ASTM A203 Grade E is a kind of Ni-alloy steel material used to fabric high temperature pressure vessels. ASTM A203Grade E this property is based on it's Ni composition.A203 Grade E is used in fabricators serving industry, especially in the oil, gas and chemical supply markets.

ASTM A203 Grade E steel plate, A203grE steel sheet ...

ASTM A203 Grade E is a kind of Ni-alloy steel material used to fabric high temperature pressure vessels. ASTM A203Grade E this property is based on it's Ni composition.A203 Grade E is used in fabricators serving industry, especially in the oil, gas and chemical supply markets.

ASTM A203 Grade E Steel plate,ASTM A203 Grade E alloy ...

ASTM A203 has five grades or levels-- Grade A/B/D/E/F. ASTM A203 Grade E steel grade is a nickel alloy steel plate in welded pressure vessels,A203 Grade E is used in fabricators serving industry, especially in the oil, gas and chemical supply markets.

ASTM A203 / A203M - 17 Standard Specification for Pressure ...

A203 / A203M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel boilers~ pressure vessels~ steel plates~ ... ASTM A203 / A203M-17, Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel, ASTM International, West Conshohocken, PA, 2017, astm.org.

A203-Grade-E, A203 grade E,A203 Gr E,A203GrE steel plate

,A203-Grade-E, A203 grade E,A203 Gr E,A203GrE steel plate . Adopt standard: ASTM A 203/A 203M-01. Gangsteel steel grade: A203 Grade A,A203 Grade B,A203 Grade D,A203 Grade E and A203 Grade F steel. A203 Grade E steel plate . A 203 Grade E steel is the element of nickel is 3.25% to be used in manufacturing pressure vessel and boilers steel grade.

ASTM A203 Grade E steel plate dealer-BEBON STEEL …

Application of ASTM A203 Grade E steel plate dealer: Widely used in petroleum, chemical industry, power plants, boilers and other fields, such as to produce reactors, heat exchangers, separators, spherical tank, oil tank, LPG tanks, nuclear reactor pressure shell, boiler drum, liquefied petroleum gas cylinders, hydropower high-pressure pipes, Turbine vortex shells and other equipment and ...

ASTM A203 Grade E Nickel Steel :: MakeItFrom

ASTM A203 grade E is a type of ASTM A203 steel. Cited properties are appropriate for the normalized condition. The graph bars on the material properties cards below compare ASTM A203 grade E to: wrought alloy steels in the same category (top), all iron alloys (middle), and the entire database (bottom).

ASTM specification A203 Grade E,A203-E Boiler steel plate

Steel Name:A203 Grade E Boiler steel plate,A203 Grade E Pressure vessel steel plate Steel Grade:A203 Grade E Steel Standard: ASTM A203/A203M Thickness:6mm-450mm Width:1200mm-4200mm Length:3000mm-18000mm Surface Treatment:Shot blasting and painting or coated Main application of ASTM A203 Grade E are used to build boilers and pressure vessels ...

ASTM A203 Low Alloy Steel, Grade D

ASTM A203 Low Alloy Steel, Grade D ... Low Carbon Steel. Material Notes: Nickel alloy steel plate. Pressure vessel quality Spec discontinued in 1989: Vendors: Available Properties; ... or reinstated as an active product. Data sheets from materials that are no longer available remain in MatWeb to assist users in finding replacement materials. ...[PDF]

Data Sheet 1 ASTM A633 Grade E - SSAB

ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures. A633 Grade E has a minimum yield strength of 60 ksi [415 MPa] and may be ordered with supplemental Charpy V-notch impact test requirements.

ASTM A203 Grade E steel plate dealer-BEBON STEEL …

Application of ASTM A203 Grade E steel plate dealer: Widely used in petroleum, chemical industry, power plants, boilers and other fields, such as to produce reactors, heat exchangers, separators, spherical tank, oil tank, LPG tanks, nuclear reactor pressure shell, boiler drum, liquefied petroleum gas cylinders, hydropower high-pressure pipes, Turbine vortex shells and other equipment and ...

ASTM A203/ASME SA 203 Gr E Steel Plate Price

ASME SA203 Grade E steel sheet price ASME SA203 Grade F pressure vessels steel plate ASTM A203 Grade A good quality steel plate ASTM A203 Grade B steel plate supplier ASTM A203 Grade D Ni-alloy steel ASTM A203 Grade E steel plate application ASTM A203 Grade F steel chemical composition Can supply different steel grades of ASME SA203 and ASTM ...

ASTM A203 Grade A|A203 Gr.A|A203GrA|STEEL PLATE__Steel ...

ASTM A203 Grade A steel grade is a nickel alloy steel plate in welded pressure vessels. For this A203 Grade A is max thickness in 150mm and the element of nickel is 2.25% to be used in manufacturing pressure vessel and boilers. ASTM A203 Grade A is used in fabricators serving industry, especially in the oil, gas and chemical supply markets.

ASTM A203 Grade F steel sheet - pressure vessel steel ...

ASTM A203 Grade E Steel plate,ASTM A203 Grade E alloy steel for pressure vessels ASTM A203 has five grades or levels-- Grade A/B/D/E/F. ASTMA203 Grade Esteel grade is a nickel alloy steel plate in welded pressure vessels,A203 Grade E is used in fabricators serving industry, especially in the oil, gas and chemical supply markets.

A203 Grade E steel plate -- Shanghai Royal Industry

ASTM A203 Grade E is a kind of Ni-alloy steel material used to fabric high temperature pressure vessels. ASTM A203 Grade E this property is based on it's Ni composition.A203 Grade E is used in fabricators serving industry, especially in the oil, gas and chemical supply markets. ASTM A203 has five grades or levels-- Grade A/B/D/E/F.

Alloy Steel Plate Astm A203 Grade E - cafethuys.nl

Alloy Plate Astm A203 Grade E - gofschools.org. steel plate,steel pipe,steel coil . A203 Grade A steel plate ASTM A203 Grade A is a kind of Ni-alloy steel material …

ASTM A203 Grade B (A203GRB) Pressure Vessel and Boiler ...

Henan HZZ offers a large selection of high quality ASTM A203 grade B (A203GRB) pressure vessel and boiler steel plate with HIC. Having been focused on various steel products for over 20 years, we now brings customers quality products with high precision and high strength. Fast delivery and good after-sales service are also available.[PDF]

Data Sheet 1 ASTM A633 Grade E - SSAB

ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures. A633 Grade E has a minimum yield strength of 60 ksi [415 MPa] and may be ordered with supplemental Charpy V-notch impact test requirements.

ASTM A203/A203M - steel-sheets-plate

Henan HZZ offers a large selection of high quality ASTM A203/A203m. Having been focused on various steel products for over 20 years, we now brings customers ASTM A203/A203m with high precision and high strength. Fast delivery and good after-sales service are also available.[PDF]

MATERIAL COMPARISON TABLE - Carbon Steel | Alloy …

ASTM STANDARD UNS NO. KS/JIS Symbol KS/JIS Number Remark DIN Type DIN Material Remark ... Cr-Ni Steel Plate Sheet and Strip Grade 304 S30400 STS304/SUS304 D3705/G4304 - X5CrNi18 9 17440 1.4301 (3b) ... MATERIAL COMPARISON TABLE . ASTM STANDARD UNS NO.

ASTM A203 Grade E is a kind of Ni-alloy steel material ...

Product :ASTM A203Grade E is a kind of Ni-alloy steel material used to fabric high temperature pressure vessels. ASTM A203Grade E this property is based on it's Ni composition.A203Grade E is used in fabricators serving industry, especially in the oil, gas and chemical supply markets.

steel grade e - Carbon steel,Alloy steel,Spring steel ...

Steel Plate ASTM A203/A203M Grade F, Grade E, Grade … Steel Plate ASTM A203/A203M Grade F, Grade E, Grade D, Grade B and Grade A in Large Stock for Sale. Chemical and mechanical properties of ASTM A203 Grade … Carbon steel - Wikipedia. Carbon steel is a steel with carbon content up to 2.1% by weight. ... brittle and crumbly at working ...

SA203 Grade F steel material-BBN STEEL sale steel A285 ...

Pressure vessel used nickel alloy steel plate SA203 Grade E,A203 Grade E,SA 203 Grade F and A203 Grade F are under steel specification ASTM A 203/A 203M and ASME SA 203/SA 203M.For pressure vessel steel plate A203 Grade E,the heat treatment shall be done as Normalized,when customers accept,tempering last more than half an hour is also Ok when ...

Grade E Shipbuilding steel plate - BEBON INTERNATIONAL

Grade E Shipbuilding steel plate. ASTM A131 Grade E shipbuilding steel is not only the common tensile strength steel but also is the Hull structural steel. Grade E shipbuilding steel has good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and good welding properties.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.